|
This issue of TechNotes includes an article on A New Long-Term Bypass Solution. It also contains a Technical Tip on Google Your Test Results and a question with answer "Q. Do you have the necessary equipment and expertise to adjust and verify Instron equipment to accuracy levels demanded by national and international standards such as ISO and ASTM? Do your verification/calibration certificates report measurement uncertainty for each measurement taken?".
|
|
As the preferred solution for low-force torsion testing and component in-service simulation, the MT MicroTorsion Series test wires, fasteners, switches, and springs in the biomedical, automotive, and aerospace industries.
|
|
The Advanced Video Extensometer uses a digital camera and LED light to perform non contacting strain measurement. Measurement of strain during materials testing is traditionally carried out using some form of contact strain measurement device. While providing accurate measurements in many applications, contact extensometers may have an adverse effect on test results. Because of this, Instron® introduced the first commercial video extensometer in 1991.
|
|
Catalog Number 2714-031
Rated capacity 50 kN (5 kgf, 11 lbf)
Suitable for a wide range of linear densities (denier and tex)
|
|
The BioPuls submersible pneumatic side action grips and temperature-controlled bath with pneumatic lifting and lowering mechanism is the ideal testing solution for a wide variety of biomedical testing applications.
|
|
Instron® Split Insert Tensile Grips are designed for safe,
high-volume production testing of shoulder-end or button-head machined specimens. Engineered with an operator focus, the split insert style tensile grips are easy to install, offer quick change inserts for standard specimen sizes, and promote efficient testing of a wide range of metals and alloys.
|
|
Instron® Shear Test Fixtures are designed for in-plane or interlaminar shear testing of composite materials. The V-Notched
Beam Method, or more commonly known as the Iosipescu Shear Method, was standardized into ASTM D5379 in 1993, while the V-Notched Rail Shear Method was more recently introduced in 2005 under ASTM D7078. Both test methods share many common characteristics and have the distinctive V-notches in the specimen design, which serve to create a localized and
approximate uniform shear stress zone between the notches. Also, a ±45° two-element strain gauge is often used to directly
verify the shear strains applied.
It’s important to note that the two fi xtures in ASTM D7078 and D5379 are quite different in the way in which load is applied to
the specimen, its specimen design, and consequently, the type of results obtained.
For the V-Notched Beam Method, the shear stress is introduced via edge-wise clamping of the specimen. By contrast, the V-Notched Rail Shear Method is derived from the rail shear method with the specimen face clamped on both sides, which gives it a strong rigid hold. The consequence of this is that ASTM D7078 has a longer shear length, or larger gage section, compared to ASTM D5379. This is important particularly for laminates with ±45° plies. These laminates have higher shear strengths and an increased risk of premature failure on the specimen edges instead of the area of interest between the V-notches. Bonded tabs
are often added to ASTM D5379 specimens as an attempt to overcome this weakness. But it remains a challenge as, with the smaller size of the specimen, the angle plies may not be fully supported and result in incorrect failure modes. Despite this, ASTM D5379 method has had extensive history of use and proven ability to produce good test results, particularly for unidirectional and 0/90 cross-ply laminates.
|
|
The 2630-100 series of extensometers offers speed of attachment and ease-of-use. The light-weight, rugged cross-brace design eliminates errors caused by physical distortion, while built-in protection ensures that damage is not caused by over-extension. The low operating-force arms of the extensometer reduce the
possibility of knife-edge slippage when testing hard or smooth surfaced materials.
|
|
Flow properties of molten plastics are a critical characteristic requiring good knowledge and control. The Instron® Melt Flow Testers are specifically designed for easy
and accurate measuring of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR). CEAST Melt Flow Testers range from systems that perform a simple
manual test procedure to semi-automated testing systems performing multiple weight tests.
|
|
DMS-Kanäle
Direkt auf einer Probe oder einem Bauteil applizierte Dehnungsmessstreifen werden in zahlreichen Branchen von der Luft und Raumfahrt bis hin zum Bauwesen zur Messung der Verformungdes zu prüfenden Materials in den unterschiedlichsten Prüfanwendungen eingesetzt.
Messgenauigkeit und Wiederholbarkeit sind ausschlaggebende Faktoren für die Erfüllung der Anforderungen von Materialprüfstandards. Kalibrierte DMS-Kanäle unterstützen dabei die Einhaltung von Standards bei Ihrer Prüfanwendung.
|
|
Die manuellen Präzisionsspannzeuge Serie 2716--028/030
sind eine zuverlässige Spannlösung für eine Vielzahl
unterschiedlicher Materialien und ermöglichen eine
wiederholbare Einspannung in Übereinstimmung mit den
Nadcap-Ausrichtanforderungen1.
|
|
The 6th Edition Accessories Catalog includes a broad range of new accessories including the Instron AutoX 750 Extensometer, Nadcap-compliant wedge grips, Bluehill® TrendTracker™, and more.
|
|
The mini high-temperature wedge grips offer an effective
gripping solution for tensile testing of high elongation
materials under high-temperature conditions. The key feature of these grips are their ability to be pulled out of the chamber porthole, maximizing the test space. The grips are rated from ambient to +150 °C or +200 °C; and are available in 100N and 1kN capacities.
|
|
|
|
Thermoplaste werden im flüssigen Zustand verarbeitet und unterliegen dabei dem Einfluss von Temperatur und Druck. Die
Fließfähigkeit des geschmolzenen Materials bei einer bestimmten Temperatur und einem bestimmten Druck ist von grundlegender
Bedeutung in der Kunststoffforschung und –technik. Die Schmelzindexprüfgeräte aus der Instron-CEAST-Produktreihe
sind speziell für die einfache und präzise Messung der Fließeigenschaften von Kunststoffen in Übereinstimmung mit den
entsprechenden internationalen ISO- und ASTM-Normen konzipiert.
Die neu gestaltete CEAST-Schmelzindex-Prüfgerätebaureihe umfasst 4 verschiedene Modelle, MF10, MF20, MF30 und MF50,
mit denen Schmelze-Massefließrate (MFR) oder Schmelze-Volumenfließrate (MVR) manuell oder halbautomatisch mit Einzel- oder Mehrgewichtsprüfungen bestimmt werden kann.
Die Prüfgeräte CEAST MF20 und MF30 sind flexible Einzelgewichts-Prüsysteme, die sich hervorragend für die Durchführung
von Prüfungen nach ISO 1133 und ASTM D1238, Verfahren A, B und C eignen. Die Geräte entsprechen den Anforderungen
von ISO 1133-2 und sind für die zuverlässige Prüfung von Standardwerkstoffen und den meisten temperatur- und
feuchtigkeitsempfindlichen Sondermaterialien geeignet. Die Geräte können mit einer Vielzahl von Optionen ausgestattet werden – von Basisprüfungen bis hin zu integrierten automatisierten Prüflösungen.
|
|
ElectroPuls™-Systeme sind hoch-moderne elektrodynamische Prüfsysteme zur dynamischen und statischen Prüfung von Material und Komponenten. Aus einer einphasigen Netzversorgung gespeist, sind sie mit neuester Prüftechnologie ausgestattet und bieten viele benutzerorientierte Merkmale und Funktionen.
|
|
Featuring a dual test space and single footprint, DX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
|
|
A letter to the customer: Instron's global calibration labs with accreditation to ISO 17025
|
|
Accreditation
US Dept. of Commerce & NIST nvlap certificate of Accreditation
|
|
Ihr neues Tor für den Zugriff auf Bluehill-Prüfergebnisse
Schnellere Datenauswertung durch effizienteres Suchen
Mit der TrendTracker-Software können Sie Bluehill-Proben auf der Grundlage eines Probenmerkmals, eines Prüfparameters oder eines Berechnungsergebnisses suchen – umständliches Durchsuchen von
Dateien und Übertragen von Daten per Copy- and-Paste gehören der Vergangenheit an.
|
|
Instron® Automated Testing Systems for elastomeric/rubber material, utilizing TestMaster automation control software, are ideal for performing unattended tensile and/or tear tests of elastomeric specimens ranging in thicknesses of 0.05 to 10 mm. These systems are designed to meet ASTM D412, D624, ISO 37 and other standards.
|
|
|
|
|
|
Auf der Control 2013, die vom 14. bis 17. Mai in Stuttgart stattfindet, präsentiert Instron neu entwickeltes Zubehör und neue Softwaremodule für die mechanische Werkstoffprüfung.
|
|
Accessories for CEAST Drop Tower and Pendulum Impact Testers.
|
|
The 3300 floor models have been developed to address the requirements of standardized and routine testing. These models provide the user with Instron quality at the most affordable price. Load capacity from 100 kN to 250 kN with a maximum speed of 500 mm/min. These systems conform to all relevant European standards and carry a CE mark.
|
|
The furnace uses an extruded heating tile for easy
service and is typically used for materials testing
applications where sample temperatures up to
+1050 °C (+1922 °F) are achievable (depending on
loadstring configuration). The standard configuration
has a high quality stainless steel case which provides
rigid mounting for extensometers.
|
|
Eine neue Reihe manuell betätigter, selbst zentrierender Keilspannzeuge von Instron zeichnet sich durch eine besonders
hohe Präzision, Zuverlässigkeit und Wiederholgenauigkeit bei der
Einspannung und Ausrichtung der Probekörper aus. Damit können
sie die hohen Anforderungen an Zugversuche erfüllen, die in den in
der Luftfahrtindustrie angewendeten NADCAP Richtlinien AC7122-1 (nichtmetallische Werkstoffe) und AC7101 (Metalle) definiert sind.
|
|
TrendTracker™ ist ein neu entwickeltes Daten-Management-Plugin für die bewährte und vielseitige Bluehill® 3 Prüfsoftware von Instron. Es legt Versuchsparameter und Ergebnisse der mechanischen
Werkstoff- und Bauteilprüfung zur Weiterverarbeitung in einer zentralen SQL-Datenbank ab und bildet damit die Basis für eine signifikante Beschleunigung der Versuchsauswertung.
|
|
Auf der JEC Europe, die vom 12. -14. März in Paris stattfindet, stellt Instron den automatischen Ansetz-Dehnungsaufnehmer AutoX 750 vor, mit dem sich der Zeitaufwand für die Werkstoffprüfung senken und die Zuverlässigkeit und Genauigkeit der Ergebnisse steigern lassen. Seine Auflösung von +/-1 μm und seine Genauigkeit von 1 μm bei einem maximalen Messbereich von 750 mm und eine Auswahl an Messchneiden machen ihn zu einem universellen, idealen Extensometer für Zug-, Druck und Biegeversuche an unterschiedlichen Werkstoffen, beispielsweise an hochsteifen Verbundwerkstoffen, Metallen und Kunststoffen.
|
|
Brochure focuses on the Industrial Series line of static hydraulic
testing equipment, formerly known as the SATEC™ Series.
|
|
Latest version of Bluehill® 3 Materials Testing Software, v3.31, released.
|
|
Industrial Series KPX Models are designed for high-capacity tension, compression, bend/flex, and shear testing. Featuring an ultra-large single test space and adjustable crosshead options, these frames deliver exceptional flexibility for a wide range of testing applications and are available in capacities ranging from 600 kN (135,000 lbf) to 3,500 kN (800,000 lbf).
|
|
Instron’s TestMaster Software is the master controller and sequencer for all of our Automated Testing Systems. TestMaster seamlessly controls all aspects of an automated test sequence that includes: user interface control; I/O control of peripheral components; device control; database communications; simultaneous process states; and visual system status lights.
|
|
The Instron Automated XY Stage Testing System is designed for automated compression testing of devices and/or components with multiple test points such as medical devices, syringes, or keypads via a motorized XY stage. The XY stage easily mounts to a 5942 or 5944 single column test frame. Instron’s TestMaster Software serves as the control platform of the system and works seamlessly with Bluehill® to develop test methods, control the test,and provide results upon the end of test.
|
|
Eine korrekte Vorbereitung der Probekörper ist von ausschlaggebender Bedeutung für die genaue
Charakterisierung eines Werkstoffs. Die ordnungsgemäße Vorbereitung des Probekörpers und die Einhaltung des vorgeschriebenen Kerbverfahrens haben einen nicht zu vernachlässigenden Einfluss auf die Zuverlässigkeit der gewonnenen Prüfergebnisse und die präzise Untersuchung des
Verhaltens des Endprodukts. Dies kann durch eine Reihe von Vorbereitungstechniken gewährleistet werden, die dafür sorgen, dass Werkstoffeigenschaften und Versagen möglichst genau analysiert werden können. Instron® bietet eine breite Auswahl an Kerb-, Fräs- und Stanzmaschinen, die den Anforderungen der wichtigsten internationalen Normen entsprechen und für die Vorbereitung einer Vielzahl von Proben mit unterschiedlichen Dicken aus harten und weichen Kunststoffen sowie
verstärkten Kunststoffen geeignet sind.
|
|
Increase the throughput and consistency of your composites and polymers testing by optimizing the test frequency with the Specimen
Self-Heating Control. This powerful add-on is specific for WaveMatrix™ Software.
Composites and various other materials are prone to significant self-heating effects during cyclic loading, but their performance also shows strong temperature dependence. This has traditionally led to fatigue testing at very low frequencies to minimize specimen heating and the resultant degradation in mechanical properties. A test run for a single S/N dataset could mean weeks of machine time.
Specimen Self-Heating Control can significantly reduce this, while providing previously unachievable confidence in test temperature.
This patented system achieves and maintains a specified test temperature by varying test frequency in response to a specimen
temperature input.
|
|
This issue of TechNotes includes an article on Materials in Space. It also contains a Technical Tip on Don't Let Your Standards Slip and a question with answer "Q: Why is Strain Rate Important?".
|
|
This whitepaper provides an in-depth description of how the new standard replaces both the previous version of ISO 6892 and the widely-used EN 10002-1:2001 standard. It is highly relevant reading for anyone performing tensile tests on metallic materials.
Instron testing machines are able to meet the demanding
requirements of ISO 6892-1:2009, both Method A, based
on strain rate control, and Method B, based on stress rate.
|
|
In enger Zusammenarbeit mit Nadcap- und ASTM-Spezialisten
haben sich die Techniker von Instron ein fundiertes Verständnis
der Anforderungen an die Ausrichtgenauigkeit von Prüfsystemen
verschafft und ein Paket von Dienstleistungen auf dem Gebiet der Ausrichtkontrolle entwickelt und implementiert, die die in der ASTME1012 spezifizierten und im Rahmen des Nadcap-Programms formulierten Richtlinien und Berechnungen erfüllen.
|
|
Instron® devotes significant R&D to ensure that its leading-edge data acquisition systems are matched with technically superior signal conditioning systems – the latest being the new 5900 Load Signal Conditioner module. Signal conditioning is a critical part of data acquisition processing and measurement, affecting the overall quality of the test measurements taken and consequently the test results accuracy and standard deviations.
|
|
An increased load accuracy range can mean lower costs, increased time savings, increased throughput, and the need for fewer load cells. This document explains the true ROI of fewer load cells using a 5900 testing system.
|
|
Die servohydraulischen Prüfsysteme Serie 8874 von Instron® sind kompakte, servohydraulische Axial-Torsions-Prüfmaschinen in Tischausführung für anspruchsvolle Anwendungen in der statischen und dynamischen Werkstoffprüfung. Die Maschinen der Serie 8874 sind für die Durchführung von Prüfungen mit axialen und Torsionsbelastungen bzw. einer Kombination beider Belastungsarten konzipiert. Mit einem an der Traverse montierten Zylinder und einem T-Nutentisch sind die Prüfsysteme Serie 8874 eine hervorragende Plattform für die Prüfung einer Vielzahl von
medizinischen Geräten, Biomaterialien, Hochleistungswerkstoffen und anderen Bauteilen.
|
|
Die Prüfsysteme Serie 8872 von Instron® sind kompakte, servohydraulische Prüfmaschinen in Tischausführung für anspruchsvolle Anwendungen in der statischen und dynamischen Werkstoffprüfung. Mit einem an der Traverse montierten Zylinder und einem T-Nuten-Tisch eignen sich die Prüfsysteme 8872 hervorragend für die Prüfung von unterschiedlichsten medizinischen Vorrichtungen und Biomaterialien, Hochleistungswerkstoffen und sonstigen Bauteilen.
|
|
Die Prüfsysteme Serie 8803 von Instron® sind flexible, servohydraulische Prüfmaschinen für statische und dynamische Prüfungen mit Kräften bis 500 kN. Die Maschinen der Serie 8803 sind eine umfassende Lösung für die moderne Werkstoff- und Bauteilprüftechnik und eignen sich hervorragend für Ermüdungs- und Bruchmechanikversuche. Mit einer Vielzahl von Konfigurationsmöglichkeiten und Optionen, zu denen auch
T-Nuten-Tische gehören, sind die Prüfsysteme Serie 8803 die ideale Plattform für jedes Prüflabor.
|
|
Die Prüfsysteme Serie 8802 von Instron® sind flexible servohydraulische Prüfmaschinen für anspruchsvolle statische und dynamische Prüfanwendungen. Die Maschinen der Serie 8802 sind eine umfassende Lösung für die moderne Werkstoff- und Bauteilprüftechnik und eignen sich hervorragend für Ermüdungs- und Bruchmechanikversuche. Mit einer Vielzahl von Konfigurationsmöglichkeiten und Optionen sind die Prüfsysteme Serie 8802 eine flexible Plattform für jedes Prüflabor.
|
|
Die Prüfsysteme Serie 8801 von Instron® sind kompakte, servohydraulische Prüfmaschinen für anspruchsvolle statische und dynamische
Prüfanwendungen. Die Maschinen der Serie 8801 sind eine umfassende Lösung für die moderne Werkstoff- und Bauteilprüftechnik und
eignen sich hervorragend für Ermüdungs- und Bruchmechanikversuche. Mit ihrem kompakten Prüfrahmen können die Prüfsysteme Serie
8801 problemlos im Labor aufgestellt werden - verstärkte Fußböden oder erhöhte Decken sind normalerweise nicht erforderlich.
|
|
Durch einen Upgrade mit einer neuen Instron® -Regelelektronik 8800 können ältere servohydraulische und dynamische Prüfmaschinen
mit Hilfe einer modernen Regelelektronik und der WaveMatrix™ -Software für Ermüdungsprüfungen oder dynamische Prüfungen bzw. der
Bluehill®-2-Software für statische Prüfungen auf den neuesten technischen Stand gebracht werden. Die Prüfrahmen von dynamischen
Prüfmaschinen versehen normalerweise über lange Jahre hinweg zuverlässig ihren Dienst und eine Modernisierung und Upgrade der
Regelelektronik ist daher eine kostengünstige Möglichkeit, die Lebensdauer vorhandener Anlagen zu verlängern und neueste Prüftechnologien nutzbar zu machen. Upgrade-Pakete mit der Regelelektronik 8800 stehen für zahlreiche servohydraulische Prüfmaschinen zur Verfügung, unter anderem für die Maschinen von Instron, Schenck, Dartec, MTS, Zwick, Shimadzu, Mayes und weiterer Hersteller.
|
|
The AutoX 750 is a high-resolution, long-travel automatic contacting extensometer. It can be mounted onto any electromechanical 3300, 5500, or 5900 table top and floor model systems, as well as LX, DX, HDX, and KN static hydraulic testing systems. It is well suited for applications involving plastics, metals, biomedical, composites, elastomers, and more. The AutoX has a maximum travel of 750 mm and accuracy of ± 1 µm.
|
|
Das Instron®- Mehrgewichts-Schmelzindexprüfgerät CEAST MF50
ist für die Bestimmung der Schmelze-Massefließrate MFR und der
Schmelze-Volumenfließrate MVR in Übereinstimmung mit ISO 1133 Verfahren A und B sowie ASTM D1238 Verfahren A, B, C, D mit Ein- und mit Mehrgewichtsprüfungen konzipiert.
|
|
CEAST MF10 ist das Einstiegsmodell der CEAST-Schmelzindexprüfgerätebaureihe. Als einfaches und robustes
Gerät ist es für die Durchführung von Prüfungen nach Verfahren A der ISO 1133, ASTM D 1238 und entsprechenden Verfahren ausgelegt.
|
|
FDA Compliance Statements
|
|
Instron® Crack Opening Displacement transducers are designed
specifically to perform standard ASTM and ISO fracture mechanics
tests (both cyclic and static), covering all common specimen
geometries (CT, SEB, Centre Crack, Arc Shaped).
Each model offers class leading linearity, whilst being rugged
enough to withstand the high energy release common in many
of these applications and can be used at both elevated and sub
ambient temperatures.
These gauges comply with requirements laid down in ASTM E399-09.
|
|
Mit Sitz in Dobersberg/Niederösterreich ist er jetzt landesweit
lokaler Ansprechpartner für alle Fragen des Erwerbs, der Modernisierung und Wartung von Instron Prüfsystemen.
|
|
Unsere neueste Prüfmaschinenbaureihe: Die Prüfsysteme aus der Serie 5900 bieten außergewöhnliche Leistungsfähigkeit in einem innovativen Prüfrahmen und beinhalten zahlreiche Verbesserungen, die für hervorragende Genauigkeit und Zuverlässigkeit, bessere Ergonomie und eine insgesamt höhere Bedienerzufriedenheit sorgen. Die Einsäulentischsysteme sind mit ihrer kompakten Bauweise ideal für den Einsatz im Labor und sind für Prüfungen mit niedrigen Kräften bis 2 kN ausgelegt. Die Zweisäulentischmodelle eignen sich besonders für die Prüfung im mittleren Kraftbereich bis 50 kN, und die Zweisäulen-Bodenmodelle sind für die Prüfung mit hohen Kräften bis 600 kN konzipiert.
|
|
Accreditation 2007
10 CFR Part 21 is the US Code of Federal Regulations for the Nuclear Industry.
|
|
Mit der neuen BioBox Temperierkammer folgt Instron dem bei
medizinischen Zulassungsbehörden wachsenden Trend, medizinische Geräte und Biomaterialien im physiologischen Zustand, d.h. bei 37°C
Körpertemperatur zu prüfen.
|
|
The Instron® Submersible Pneumatic Wedge Grips and the Extended Height BioBath system is designed to perform tensile testing on a wide range of biomedical specimens. The BioBath has a pneumatic lifting mechanism that moves the bath up to immerse the test specimen or down to expose the grips for inserting and removing specimens. When used in conjunction with the temperature-controlled fluid circulator, the fluid temperature can be regulated to simulate in-vivo conditions. Distilled water or saline solution can be heated to 37°C and the temperature is maintained within ±1°C through the closed-loop temperature controller. The cylindrical transparent bath provides great visibility of the specimen during testing, while a flat section allows the video extensometers an undistorted view of the gauge section.
The submersible pneumatic wedge grips allow for easy specimen insertion, alignment, and positioning. Instron’s design of moving grip bodies minimizes any axial compressive preloading of the specimen during clamping. The wedge effect increases the gripping force, making them suitable for testing higher strength tissues, plastics, and wires.
|
|
Featuring a dual test space and long test stroke HDX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
|
|
In enger Zusammenarbeit mit Nadcap- und ASTM-Spezialisten
haben sich die Techniker von Instron ein fundiertes Verständnis
der Anforderungen an die Ausrichtgenauigkeit von Prüfsystemen
verschafft und ein Paket von Dienstleistungen auf dem
Gebiet der Ausrichtkontrolle entwickelt und implementiert, die
die in der ASTME1012 spezifizierten und im Rahmen des
Nadcap-Programms formulierten Richtlinien und
Berechnungen erfüllen.
|
|
Featuring a dual test space and long test stroke, HVL Models are designed for high capacity tension, compression, bend/flex, and shear testing.
|
|
Featuring a large, single test space and single footprint, LX Models are designed for high-capacity tension, compression, bend/flex, and shear testing.
|
|
Industrial Series - Excellence in High-Capacity Materials Testing:
The trend toward high-strength, lightweight materials for the aerospace, energy, construction, and transportation industries requires materials testing systems to be durable, yet maintain precise control while generating critical test data. Software user interfaces must be easy to use, yet flexible enough to meet the increasing demands of the testing world. The Industrial Series delivers exceptional performance packaged in reliable, innovative system designs that offer superior accuracy and repeatability, improved safety, and an overall enhanced user experience.
The global expertise of Instron® came about through the merging of recognized materials testing equipment companies including
Schenck, Wolpert/Amsler, Riehle, Baldwin, and SATEC™. The Industrial Series leverages this proud heritage with Instron’s load cell measuring system, instrumentation, control electronics, accessories, and industry-preferred materials testing software to provide the ultimate high-capacity testing platform.
|
|
Seitliche wirkende Schraubspannzeuge sind bei vielen Anwendungen eine einfache und effiziente Möglichkeit der Probeneinspannung. Dank der beidseitigen Spannwirkung der Spannzeuge der Serie 2710-100 lassen sich die Klemmbackeneinsätze auf unterschiedliche Probendicken einstellen. Damit ist gewährleistet, dass die Einleitung der Zugkraft immer konzentrisch zum Spannzeugkörper erfolgt. Die Spannzeuge lassen sich mit einer Reihe von austauschbaren Klemmbackeneinsätzen in verschiedenen Größen und mit verschiedenen Oberflächen ausstatten – z.B. glatt geschliffenen, gummibeschichteten oder gezahnten Oberflächen. Klemmbackeneinsätze mit linierten Kontaktflächen und speziellen Beschichtungen stehen ebenfalls zur Verfügung.
|
|
Seitliche wirkende Schraubspannzeuge sind bei vielen Anwendungen eine einfache und effiziente Möglichkeit der Probeneinspannung. Dank der beidseitigen Spannwirkung der Spannzeuge der Serie 2710-100 lassen sich die Klemmbackeneinsätze auf unterschiedliche Probendicken einstellen. Damit ist gewährleistet, dass die Einleitung der Zugkraft immer konzentrisch zum Spannzeugkörper erfolgt. Die Spannzeuge lassen sich mit einer Reihe von austauschbaren Klemmbackeneinsätzen in verschiedenen Größen und mit verschiedenen Oberflächen ausstatten – z.B. glatt geschliffenen, gummibeschichteten oder gezahnten Oberflächen. Klemmbackeneinsätze mit linierten Kontaktflächen und speziellen Beschichtungen stehen ebenfalls zur Verfügung.
|
|
This issue of TechNotes includes an article on The Difference is Measurable – Measurement Uncertainty in Calibration. It also contains a Technical Tip on Balancing the Load Cell and a question with answer "Q: What is the difference between percentage of full-scale and percentage of reading?".
|
|
Pneumatic cord and yarn grips provide a convenient method for clamping fiber, cord, yarns and fine wires to reduce the problem associated with testing these materials. A specially designed horn with a smooth finish and a contoured surface with a graduated cam allows for easy loading and a stress reduced clamping area on the specimen. The clamping mechanism can be activated either automatically or through a foot switch. This allows hands-free grip
operation enabling the specimen to be held with both hands, for easy loading. Pneumatic cord and yarn grips provide selectable clamping force to accommodate different materials and excellent follow-up action which compensates for decay of the holding force due to specimen creep.
|
|
Der ComplianceBuilder (CB) ist eine
Add-On-Lösung, die in Instron-®-Software wie Bluehill,
WaveMatrix und Partner integriert werden kann, um die
notwendigen Funktionen für die Erfüllung der neuesten
FDA-Vorschriften 21 CFR § 11 bereitzustellen.
|
|
The tension grips are designed to perform static tensile tests on shoulder-ended and threaded-end test specimens to various international standards.
|
|
Heavy grips and accessories can be awkward to install in
mechanical testing machines, and safety regulations limit the
amount that people can lift without risk of injury. For these
reasons it is typically necessary to use an external lifting
system – like a forklift or a crane – to lift and install grips or
accessories weighing much more than 15 kg (30 lbs). This is
typical for testing machines with capacities of 100 kN (22,000
lbf) and higher, thus requiring planning and working with
maintenance or facilities departments, all of which consumes
valuable testing time.
The Instron® GripHoist is designed to make the installation of
heavy grips possible without the use of external lifting systems.
It is intended for lifting accessories weighing up to 250 kg (500
lbs) into electromechanical or servohydraulic testing systems
that are fl oor mounted (not table mounted), and with capacities
of 100 kN (22,000 lbf) or more.
When used with Electromechanical testing systems, the moving
crosshead is used as the actual lifting mechanism, typically
with a fi xed length strap.
When used with servohydraulic testing systems, the upper
crosshead remains fi xed, and a “come-along” or other kind of
hoist is used to raise and lower the accessory.
|
|
The Instron® model 2810-005 Coefficient of Friction Fixture
measures the static and kinetic coeffi cient of friction of
plastic fi lm and sheet using the ASTM D1894 or
ISO 8295:2004 standards.
|
|
Part 2: Making Your Testing Easier - Gripping
|
|
Part 1: Making Your Testing Easier - Fixturing
|
|
Liefer- und Dienstleistungsbedingungen Instron Deutschland GmbH.
|
|
1000°C Furnace and Accessories
|
|
New Medical Device and Biomaterial Testing Accessories
|
|
Our new hydraulic side-action grips, with an open-front design, incorporate DuraSync technology and provides an ideal solution for high-capacity metals testing. Available in capacities from 250kN to 2000kN.
|
|
Die Basis bildet ein elektrodynamisches Prüfsystem Instron® ElectroPuls E1000. Zwei unterschiedlich ausgeführte Halterungen fixieren gerade beziehungsweise abgewinkelte Implantate. Beide Varianten lassen sich entweder direkt auf die Aufspannplatte des
ElectroPuls Prüfsystems oder am Boden eines temperierten Tauchbades fixieren.
|
|
Die ISO 14801 “Zahnheilkunde - Implantate - Dynamische Ermüdungsprüfung für enossale dentale Implantate” spezifiziert ein Verfahren für die Ermüdungsprüfung von Dentalimplantaten. Solche Dentalimplantate werden von unterschiedlichen Herstellern entwickelt und haben je nach dem, an welcher Stelle im Mund sie platziert werden, unterschiedliche Geometrien und Größen. Die ISO 14801 legt ein Referenzverfahren fest, das sich für eine vergleichende In-Vitro-Prüfung von Implantaten unterschiedlicher
Konstruktionen und Geometrien eignet.
|
|
A question frequently asked about the required data rate to meet a given accuracy is: How many data points per second are required to characterize a test? Instead, the correct questions should be: 1) What is the bandwidth of the transducer conditioning system required in order to give an accurate measurement and 2) What is the required data rate?
|
|
This issue of TechNotes includes an article on Biomimetics – Material Structure in Nature. It also contains a Technical Tip on Advantages of a Twin-Bore Capillary Rheometer and a question with answer "Q: What is GR&R?".
|
|
The new range of 3119-600 Series environmental chambers is designed for use with dual column table model test machines. Three height options are available, each capable of providing temperatures from -100 deg.C to +350 deg.C. Many new standard features have been introduced such as USB interface, heated window, and removable wedges.
|
|
Merkmale
Unbegrenzter Support über Telefon, E-Mail sowie Online Support durch qualifizierte
und erfahrene Instron-Ingenieure.
Die sichere Online-Unterstützung von Instron bietet Folgendes:
• Sofortige Hilfe, als ob der Ingenieur direkt neben Ihnen säße
• Benutzerfreundliche Kundenschnittstelle, die einen schnellen Zugang zu
direkter Fernwartung ermöglicht
• Der Maschinenbediener überwacht den externen Zugriff und kann jederzeit
eingreifen
• Fehlersuche oder Diagnose zur Lösung eines Problems
• Sie verfolgen im Dialog mit dem Service-Ingenieur alle Aktionen
am Bildschirm
• Unterstützung bei der Prüfmethodenerstellung und Einstellungen
Kostenfreie Software-Updates
Bei Verlust kostenfreie Kopien Ihrer Software CDs sowie Bereitstellung von
weiteren Anwenderbüchern
30% Nachlass auf die neue Software-Version eines jeden Systems, das unter
diesen Vertrag fällt
|
|
The Instron® Industrial Series KX Models are designed primarily for high-capacity tension testing. Featuring an ultra-large single test space and fixed-height crosshead, these frames deliver advanced testing capabilities for many applications and are available in capacities ranging from 600 - 1500 kN
(135,000 - 337, 500 lbf). Understanding the critical importance of operator safety, the KX Models incorporate high-quality materials, components, and craftsmanship.
|
|
Die neuen, modularen Schmelzindex-Prüfsysteme Instron®
CEAST MF20 und MF30 sind vielseitig einsetzbare Eingewichts-Messgeräte, die sich für die Forschung und Entwicklung ebenso eignen wie zur erweiterten Qualitätskontrolle. Sie geben dem Anwender ein Plus an Komfort und Präzision bei der Bestimmung der Fließfähigkeit von Kunststoffen nach ASTM D1238 sowie nach ISO 1133.
|
|
The 8800 controller is a class-leading, fully digital dynamic controller that utilizes Instron® core technologies and is capable
of running static and high-frequency dynamic tests. Found at the heart of Instron’s servohydraulic testing systems, the 8800
controller provides full system control, machine safety, transducer conditioning, and data acquisition, as well as acts as the foundation for the user interface to the testing machine.
|
|
The 2810-400 flexure fixture allows a variety of flexural tests to be performed, including determination of flexural
modulus,flexural strength and flexural yield strength.
Easy-to-install, the three-point fixture can be modified
with an optional conversion kit to provide a four-point
bending conversion
|
|
In der Medizintechnik werden in den Körper einbrachte Vorrichtungen und Implantate von medizinischen Zulassungsbehörden
häufig im physiologischen Zustand geprüft. Das Bio-Box-System von lnstron® entspricht dem wachsenden Trend, medizinische
Vorrichtungen und Biomaterial bei Körpertemperatur (37°С) zu prüfen. Bei großen oder langen Objekten ist eine Prüfung in
Flüssigkeit unter Umständen nicht praktikabel. In diesen Fällen ist eine Prüfung in Luft in einer temperierten Umgebung eine
leistungsstarke Alternative.
Die BioBox-Prüfkammer kann als Standardausstattungsteil an einer neuen Einsäulenprüfmaschine angebaut oder an
bestimmten bereits im Einsatz befindlichen Modellen nachgerüstet werden. Das System ermöglicht die Prüfung von Nahtmaterial,
Katheterschläuchen, Latexhandschuhen und vielen anderen Prüfkörpern und Biomaterialien bei physiologisch relevanten
Temperaturen über den vollen Bewegungsbereich der Prüfmaschine.
|
|
Instron auf der Fakuma 2012:
Messen und Prüfen in Forschung, Entwicklung und
Qualitätssicherung
|
|
Catalog number 2715-003/ 004
Rated capacity 50 kN (5000 kgf, 11250 lbf)
|
|
Catalog number 2714-107
Rated capacity 10 kN (1,000 kgf, 2,250 lbf)
Suitable for testing a wide range of tire cords, braided wire and mono-filements.
|
|
Catalog number: 2714-010
Rated capacity 5 kN (500 kgf, 1,125 lbf)
Suitable for testing a wide range of tire cords, braided wire and mono-filements
|
|
Die nachfolgenden Bedingungen sind Bestandteil des Software-Supportvertrags bei der Durchführung von Remote Support durch Instron
|
|
This issue of TechNotes includes an article on Niagara Prosthetic Foot: Material and Structure Working Together. It also contains a Technical Tip on Data Rate and Bandwidth and a question with answer "Q: What is the best way to grip soft biological tissues for tension testing?".
|
|
Das System ElectroPulsTM E1000 ist ein modernes, komplett elektrisch betriebenes Prüfsystem für die dynamische und statische Prüfung einer Vielzahl unterschiedlicher Werkstoffe und Bauteile. Es beinhaltet eine leistungsstarke digitale Steuer- und Regelelektronik von Instron®, einen Dynacell -Kraftaufnehmer, Bediensoftware sowie die neuesten Entwicklungen in der Prüftechnik - mühelose Regelkreisoptimierung auf der Basis der Probensteifigkeit, elektrische Traversenverstellung, einen T-Nuten-Tisch für flexible Versuchsaufbauten und zahlreiche andere benutzerorientierte Eigenschaften. Das System wird mit einer Einphasen-Wechselstromversorgung gespeist und benötigt für den Basisbetrieb keine weitere Medienversorgung (wie zum Beispiel Druckluft, Hydrauliköl oder Wasser).
|
|
Das System ElectroPulsTM E3000 ist ein modernes, komplett elektrisch betriebenes Prüfsystem
für die dynamische und statische Prüfung einer Vielzahl unterschiedlicher Werkstoffe und Bauteile.
Es beinhaltet eine leistungsstarke digitale Steuer- und Regelelektronik von Instron, einen Dynacell
-Kraftaufnehmer, Bediensoftware sowie die neuesten Entwicklungen in der Prüftechnik - mühelose
Regelkreisoptimierung auf der Basis der Probensteifigkeit, elektrische Traversenverstellung, einen
T-Nuten-Tisch für flexible Versuchsaufbauten und zahlreiche andere benutzerorientierte Eigenschaften.
Das System wird mit einer Einphasen-Wechselstromversorgung gespeist und benötigt für den
Basisbetrieb keine weitere Medienversorgung (wie zum Beispiel Druckluft, Hydrauliköl oder Wasser).
|
|
BioCoat ist eine neue Schutzabdeckung aus Polyurethan für die
Basis von Instron® Einsäulen-Prüfsystemen aus der 5940er Baureihe für Versuche mit niedrigen Kräften.
|
|
Instron® -Kraftaufnehmer sind ein integraler Bestandteil der Kraftmesskette von
Prüfsystemen und wurden von Instron speziell für anspruchsvolle Anwendungen in der
Prüftechnik entwickelt.
|
|
This issue of TechNotes includes an article on Damascus Swords - An Ancient Advanced Material. It also contains a Technical Tip on Extensometer Slippage and a question with answer "Q: What is the Best Way to Grip Thin-walled Steel Tubes for Tension Testing?".
|
|
The effect of temperature on the mechanical properties of plastic
materials has a fundamental role in the design of components,
especially in the selection of materials. Unlike metals and ceramics,
plastics are extremely sensitive to the slightest changes in temperature.
The selection of plastics for applications under different temperatures
is a complex task. The material must be able to support a stress under
operating conditions without losing its strength and without critical
distortion. The effect of temperature on geometrical stability and
mechanical properties in general can be studied following different
procedures and methods like at constant temperature or with a
temperature ramp.
|
|
The effect of temperature on the mechanical properties of plastic
materials has a fundamental role in the design of components,
especially in the selection of materials. Unlike metals and ceramics,
plastics are extremely sensitive to the slightest changes in temperature.
The selection of plastics for applications under different temperatures
is a complex task. The material must be able to support a stress under
operating conditions without losing its strength and without critical
distortion. The effect of temperature on geometrical stability and
mechanical properties in general can be studied following different
procedures and methods like at constant temperature or with a
temperature ramp. From very simple units for QC labs to more
advanced and automated systems, the Instron line of CEAST
Thermal testers are designed to measure the heat deflection
temperature (HDT) and the Vicat softening temperature (VST)
according to the related ISO and ASTM international standards.
|
|
In dieser Ausgabe: Zubehör für die Elastomerprüfung
Egal ob neue Handyschale oder wirtschaftlichere Autoreifen – die Anforderungen an die Produktion und Leistung von Gummi und Elastomeren befinden sich im steten Wandel. Eines ist jedoch sicher: das Rohmaterial bzw. das Endprodukt muss auch in Zukunft geprüft werden, und dies oftmals gemäß Industriestandards. Das Zubehör von Instron® ermöglicht dem Messtechniker die verlässliche Prüfung auf der Basis vieler dieser Standards
|
|
In dieser Ausgabe: Zubehör für die Verbundwerkstoffprüfung
Instron®-Prüfsysteme kommen weltweit bei der Ermittlung der mechanischen Eigenschaften von Verbundwerkstoffen zum Einsatz. Bei modernen Anwendungen, etwa in den Bereichen Luft- und Raumfahrt, Kraftfahrzeugbau und erneuerbare Energien, sind die Anforderungen an Präzision, Zuverlässigkeit und Benutzerfreundlichkeit strenger denn je.
|
|
Instron® Professional Services bietet bereits seit vielen Jahren
Validierungs- und Dokumentationsdienstleistungen zur Unterstützung der
Installations-/Funktionsqualifizierung (IQ/OQ) am Aufstellungsort an. Ziel
einer solchen Installations-/Funktionsqualifizierung, durchgeführt vom
Originalausrüstungshersteller, ist es, zu gewährleisten, dass Ihr
Instron-Prüfsystem für den vorgesehenen Verwendungszweck geeignet
ist, und dass damit zuverlässige Prüfergebnisse (entsprechend FDA 21
CFR 820.72) gewonnen werden können. Außerdem können Sie Zeit sparen
und Ihren Personalaufwand senken, wenn Sie die IQ/OQ -Prüfungen durch
Instron Professional Services durchführen lassen. Unsere erfahrenen
Servicemitarbeiter nutzen für diese Kontrollen ein bewährtes, auf Ihre
speziellen Bedürfnisse zugeschnittenes Dokumentationspaket, das die
notwendigen IQ/OQ -Unterlagen, Arbeitsblätter für die Berechnungen
und Handbücher umfasst.
|
|
Instron® Firmen Profil
|
|
This issue of TechNotes includes an article on Ah, Summer – The Ping of the Bat. It also contains a Technical Tip on Hang Loose? Not While Testing and a question with answer "Q. I’m testing colored plastic specimens, and I’m having trouble getting my video extensometer to consistently locate the specimen marks. Can you help?".
|
|
Dentalklebstoffe, Amalgame,
Zahnporzellane, Polymere und Keramiken
werden in vitro geprüft, um ihre Eignung für
die wiederherstellende Zahnheilkunde und
die prosthetische Versorgung nachzuweisen.
Zur Beurteilung ihres Langzeitverhaltens in
der Mundhöhle werden Dentalimplantate
Ermüdungsprüfungen unterzogen. Im
Folgenden finden Sie einige Beispiele
unserer Prüflösungen für Dentalmaterial
und Implantate.
|
|
Parenteral products contained in vial package systems require
a robust seal at the interface between the glass vial and the
elastomeric closure to prevent contamination and product leakage.
The seal is established in the manufacturing process, but must
withstand a variety of handling, processing and storage conditions.
|
|
Sutures are widely used in the biomedical industry. They are used in
a variety of surgical procedures to allow for wound closure and aid
in tissue healing. Sutures are manufactured from various different
absorbable and nonabsorbable materials, and may be single filament or braided with or without a coating. There are some challenges in testing sutures. Loading the specimen alone can pose problems as some sutures are delicate and require a low amount of force to fracture. Also, some sutures are used inside wounds and are constantly in a hydrated environment.
|
|
Surgical tubing is used in a wide variety of applications, such as
drains, feeding tubes, irrigation and surgical procedures, and therefore comes in many shapes and sizes. The mechanical performance of the material used is critical, as failure could seriously endanger a patient. Tensile tests are frequently performed in product development and quality control to evaluate properties of material strength and strain at break.
|
|
Sutures are used in a variety of different surgical procedures to
close wounds and aid in tissue healing. They are manufactured from
a variety of different absorbable and nonabsorbable materials, and
may be a single filament or braided with or without a coating. Tensile
strength is a critical measure of performance during and after surgical procedures. The strength of different knotting techniques must also be evaluated. The test method must determine breaking strength and corresponding elongation and adhere to Food and Drug Administration (FDA) guidelines. Precise, consistent and reliable measures of strength and strain are essential for product development and quality control.
|
|
With continued growth in the biomaterials market, characterization of the mechanical properties of soft tissues has become a rising interest. These properties allow for the understanding of tissue function and injury mechanisms, aiding engineers and researchers in the development of bio-engineered tissues, computer assisted and remote robotic surgical methods, and injury prevention recommendations. One of the challenges in testing soft tissues arises in gripping of the specimens.
Biological tissues are often times wet, slippery or delicate. Any
combination of these characteristics leaves the existing test methods far below the ideal gripping solution. The ultimate goal lies in the fixation of soft biological tissues without causing premature failure or slippage.
|
|
Use of a hypodermic needle is the most direct method for
administering medication. The medication is usually injected
intramuscularly, where there is a rich supply of blood vessels,
or intravenously, allowing the medication to be absorbed into the
blood stream and begin acting almost immediately. Hypodermic
needles are usually manufactured out of stainless steel and
the material and design must be tested to evaluate the needle’s
maximum tensile strength and yield strength. The challenge in
testing these tubular devices is in gripping the specimen without
causing premature failure in the grip faces.
|
|
The Instron® low-force Planar Biaxial (or cruciform) System was designed to perform mechanical testing and property analyze soft tissues and biomaterials in two axes. This test system is highly configurable, designed to give maximum flexibility to soft tissue tests.
|
|
Nitinol is a shape memory, superelastic alloy for which the
biomedical industry has found extensive uses. A few examples of
the numerous applications that use Nitinol include stents, dental
wires, catheter guide wires, internal fracture fixation devices,
biopsy forceps and others.
|
|
Instron® provides two different needle testing systems ideally suited for needles used in abdominal, fistula, vascular, intestinal, and other surgical procedures. The curved needle puncture tester is used to evaluate needle sharpness and insertion force. The needle bend tester is used to ensure that the needles are strong enough to not bend excessively during use. With their tabletop design, both systems have a small footprint and take up minimal lab space. The testing systems operate with the Instron Bluehill® Software that provides test control, data acquisition, test results, and reports.
|
|
Characterization of the mechanical properties of soft tissue used in
medical applications is at the forefront of biomedical engineering,
tissue engineering and materials testing in both industry and academia.
The mechanical characteristics of living tissue are required in order to
accurately create bioengineered replacement tissues and for medical
diagnostic purposes.
|
|
A key concern for dental restorative materials and adhesives is their tensile and shear bond strength to the tooth enamel. However, alignment errors associated with angularity and concentricity of the specimen can make pure tensile and shear testing difficult. In the tensile bond strength test, load is applied perpendicular to the bond line inducing pure tensile loads. However, this can be quite difficult as alignment errors can induce bending stresses which results in premature failure and consequently yielding incorrect low results
The ISO 11405 standard seeks to address this problem with fixtures that ensure specimen alignment during test set up. The Instron BioPuls™ shear and tensile strength test fixtures meet and exceed the ISO requirements by addressing alignment of the specimen during preparation, as well as preventing loss of alignment during testing. The specimen preparation accessory follows the ISO recommendations for set up of the specimen prior to test. It comes with a complete set of tools including cups and studs for multiple test specimens.
|
|
A pharmaceutical manufacturer wanted to investigate the forces
necessary to eject medications from various types of syringes
and needles.
|
|
Hydrogels are widely used in the biomedical industry for applications
such as coatings for catheters, contact lenses, scaffolds, and wound
dressings because these materials have the ability to absorb fluids
and swell up to 2000 times their original size. Hydrogels are often
implanted into the body to provide medical benefits and therefore
must be tested in a simulated environment.
|
|
Medical adhesives are widely used in the biomedical industry for applications such as bandages, secondary dressings, and wound closure. The adhesive strength of these products must be clearly defined before put to use in a clinical setting. If the adhesive is not strong enough, the product may lead to infection or poor healing. If the adhesive is too strong, the underlying tissue may become damaged upon removal.
|
|
Nitinol is a shape memory, superelastic alloy for which the biomedical industry has found extensive uses. A few examples of the numerous applications that use Nitinol include stents, dental wires, catheter guide wires, internal fracture fixation devices, biopsy forceps and others. The major challenge in testing this material is accurate strain measurements. The Instron® Advanced Video Extensometer (AVE) is a solution which allows for strain measurement of Nitinol wire in cyclic loading and to failure.
|
|
Extensometers are often used to accurately measure the deformation of a
material under mechanical loading. Due to the fragile nature of biological soft tissues, such as fascia, skin, and intestinal lining, a non-contacting extensometer is the ideal solution for measuring tensile strain in these specimens.
The AVE uses a high-resolution digital camera and advanced real-time
image processing to make precise axial and transverse (optional) strain
measurements on test specimens. Because these tissue specimens are
soft, moist, and vary in color, the challenge in acquiring strain data lies in the marking technique. The purpose of this study was to investigate different AVE marking techniques for biological tissues.
|
|
The Instron® Testmaster Automation System, configured to perform unattended tensile testing of biomedical cord and yarn specimens, provides an ideal solution for high-volume tests of medical sutures. Designed to accommodate specimens of varying lengths and thicknesses, the system utilizes barcode labels to pass specimen information and testing specifications to the Testmaster2 Automation Control Software.
A typical automated test sequence includes the following steps: The robot retrieves a batch separator with a barcode label affixed from a rack, scans the barcode, and downloads the specimen and testing information to the Testmaster2 Automation Control Software. The separator is then discarded into a bin and a specimen is retrieved from the racks and placed into the tensile frame and tested. After the test, the specimen is removed via a specimen removal device at the back of the frame, which utilizes a low-noise, industrial vacuum to aid in full removal of the tested sutures from the grips area. The robot then inserts the next specimen to be tested.
|
|
The customer has delivered three different samples of medical packaging that were prepared into 1 inch wide specimens for testing. The seal strength of the packaging was to be evaluated in a 180 degree peel test as described by ASTM F 88 - Standard Test Method for Seal Strength of
Flexible Barrier Materials.
|
|
Millions of people use contact lenses on a daily basis, making
them one of the most widely used medical devices in the world.
Preferred over eyeglasses, they are used for a variety of eye
correction prescription and are manufactured in an array of
forms ranging from hard to soft lenses.
When testing lenses, loading the specimen into the grips can
pose many problems: the soft lens material is slippery and
delicate fracturs at very low forces; and the test specimens are
extremely small, providing a limited amount of gripping surface.
Contact lenses must also be tested in an environment that best
simulates physiological conditions; ambient testing results in the
drying out and cracking of the material.
|
|
Use caution when comparing the values of a 180 degree peel adhesion test without understanding the test instrument’s bandwidth and data acquisition settings.
|
|
Wenn die Studenten und Doktoranden des Institute of Polymeric
Materials and Testing (ipmt) an der Johannes Kepler Universität (JKU) im österreichischen Linz das Versagensverhalten von Kunststoffen untersuchen, helfen Ihnen dabei drei elektrodynamische Prüfmaschinen von Instron.
|
|
Erstmals präsentieren sich fünf Mitglieder aus der Test and Measurement Group von Illinois Tool Works (ITW) auf der Control 2012 unter einem Dach. Auf Messestand 1522 in Halle 1 findet der Fachbesucher konzentrierte Informationen in Sachen Werkstoff- und Bauteilprüfung, von hart bis weich, von elastisch bis spröde.
|
|
Die Instron EXTEND- Retrofit-Pakete ermöglichen das kosteneffiziente Aktualisieren der Funktionalität und des Sicherheitsstandards in die Jahre gekommener elektromechanischer Instron Prüfsysteme. Zum vollständigen, auf den jeweiligen Maschinentyp abgestimmten Ausstattungssatz dieser modular aufgebauten Pakete gehören die Neukomponenten der Maschinensteuerung und leistungsstarke Signalverarbeitungsmodule, die baugleich mit den Systemen der aktuellen Instron Prüfmaschinen-Baureihen sind.
|
|
Spezifikation 5960 Tischmodell, zweisäulig
|
|
This issue of TechNotes includes an article on Bamboo Bikes – A “Growth” Industry. It also contains a Technical Tip on Strain Measurement When Testing Composites and a question with answer "Q: What is the most effective gripping technique for a composite specimen with a hard, smooth surface?".
|
|
Die Bluehill Lite-Software von Instron bietet Ihnen alle Funktionen, die Sie für die schnelle und effiziente Durchführung standardisierter Zug-, Druck-, Biege-, Schäl-, Weiterreiß- und Reibprüfungen und einfacher zyklischer Prüfungen benötigen. Dank der intuitiv bedienbaren, webähnlichen Benutzerschnittstelle können Sie jetzt noch komfortabler Prüfungen durchführen, Prüfergebnisse auswerten und Prüfdaten mit anderen Benutzern gemeinsam nutzen.
|
|
Instron® Automated Testing Systems for the testing of Plastics are confi gured to perform unattended tensile and fl exural
testing of rigid, plastic specimens of varying lengths and thicknesses (from 0.1 to 12 mm).
|
|
The 5900 Series Multi Station systems offer enhanced throughput with their ability to perform simultaneous, independent tests on up to five (5) separate specimens using a single load frame.
|
|
Industrial Series RD Models are designed for high-capacity compression testing of concrete cylinders, cubes and blocks. Constructed with operator safety of critical importance, these ultra-stiff frames are ideally suited for advanced testing of concrete mixes.
|
|
Many tests performed in the medical device and biomaterials applications occur in vitro, in solution, or in similar fluid environments. To protect the internal electronics of testing systems, any liquid spilling or leaking from the bath should be prevented from finding its way inside the frame. The lnstron® BioCoat is а protective element for your lnstron 594х Testing Systems. The BioCoat creates а liquid resistant cover that not only protects the system, but also provides а smooth surface that is easy to clean. This additional layer of safety means that your investment in а top-quality tesitng system is protected and will ensure many years of reliable and repeatable test results.
|
|
SFX Series Testers have made quality, advanced technology, and superior support affordable for the spring industry. The SFX1560 Series features a tabletop frame and is available in capacities up to 30 kN (6,750 lbf).
|
|
Pneumatic action grips allows rapid, easy loading of specimens from delicate films to polymers and woven fabrics. This provides a very simple and efficient method for holding flat test
specimens in applications where you can easily insert the specimen and quickly apply a clamping force. Both jaw faces automatically adjust to different specimen thickness to ensure that the line of tensile force remains concentric with the grip body.
They can be equipped with a selection of interchangeable grip jaw faces in various sizes and choice of surfaces including smooth ground, rubber-coated and serrated. Line contact and special coated faces are also available. Grip control may incorporate a footswitch allowing hands-free operation for speed, simplicity-of-use and accuracy of alignment within the grips. In addition, grip opening and closing can be controlled from the testing machine, providing features such as automatic pretension and grip release on specimen break.
Catalog number 2712-019
Rated capacity: 250 N (25 kgf, 50 lbf)
|
|
Instron® Automated Tensile Testing Systems for metals are configured to perform unattended tensile testing of metallic specimens of varying lengths and thicknesses. Tests to ASTM E8 and EN 10002-1 standards. Includes r and n value results as well as capability of r-bar/Delta r and Bake Hardening index. Standard system capacities of 100 and 200 kN (more available upon request).
|
|
This document constitutes the highest level of documentation of quality measures in the corporation. It takes precedence over any supporting documents.
|
|
Don’t miss out on this year’s offers
|
|
The new CEAST DAS 64K is a state-of-the-art Data Acquisition System designed for impact testing instruments. Compatible
with the full range of CEAST impact testing systems, including pendulum type machines (CEAST 9000 Series) and drop towers (CEAST 9300 Series), it’s the key for instrumented impact testing. The DAS 64K also enables the data collection
from instrumented tups or hammers on older models and non-CEAST impact machines.
|
|
This issue of TechNotes includes an article on Hobas Pipe USA Installs Giant Custom-Built Instron Frame. It also contains a Technical Tip Selecting a Pressure Transducer for Your Capillary Rheometer and a question with answer this issue is "Q: What is the resolution and accuracy of your Smart Rheo load call?".
|
|
Guide to the various components of a high-temperature tensile testing system--furnaces, grips, pull rods, and extensometry. Includes an important system configuration tool.
|
|
Learn how the demand for lightweight composite materials and structures for aerospace and automotive, along with the development of environmentally sustainable energy systems, have affected the requirements for physical and mechanical testing.
|
|
Instron offers the SI-Series of pendulum impact testers designed for testing metals in accordance with ASTM E23. Five models provide energy ranges from 25 - 300 ft-lbs (33.8 - 406.7 joule).
|
|
Simulates fatigue loading of hip ste during a gait cycle.
|
|
www.instron.com
Products for Materials Testing
Designed to suit ElectroPuls™ test instruments, the 2742-102 and -202
mechanical wedge action grips are suitable for tension, compression and
reverse-stress testing on a wide range of specimens and materials. The
grips are mechanically operated and the open-fronted design provides easy
specimen insertion, positioning and clamping.
|
|
The Biopuls submersible pneumatic versa grips provide an easy and
efficient method for gripping test specimens, ranging
from thin film polymers to biological tissues, in a fluid
bath for tension and torsion mechanical testing.
|
|
Compliant with ASTM E 1012 standards, the New AlignPRO™ system is designed to assist you in the measurement, adjustment and verification of load string alignment.
|
|
Implants and the materials used for their production undergo extensive tests, which include the evaluation of the static and dynamic mechanical properties of the raw materials, components and systems. Many of these tests are internationally standardized, other testing proceduresare specific to a given application.
|
|
This issue of TechNotes includes an article on Predicting the Properties of Virtual Materials. It also contains a Technical Tip Grip It Right and a question with answer this issue is "Q: What is a “Virtual measurement”?".
|
|
Polymer melts exhibit a complex f ow behavior and show a different
fluidity based on the applied pressure. A deeper plastics material characterization can be achieved if more than one condition is used within a single experiment, following a multiple weight test procedure dedicated to advanced quality control and research purposes.
|
|
Adapter to connect a single 350 ohm strain gauge to a strain channel on an Instron test machine. It is provided with spring loaded terminals for attachment of strain gauge leads and it is suitable for maximum strains of 5%.
|
|
In case you've missed some of our issues throughout the year, we've compiled this Special Edition Issue - Year at a Glance. You will find the most popular articles, technical tips, and Q&A of 2011. Here's to a fantastic year and the hopes of a great 2012!
|
|
This issue of TechNotes includes an article on Liquidmetal – Not Just for Terminators. It also contains a Technical Tip answering the question "When did you last change your oil?" The question with answer this issue is "Q: Our testing lab is moving to a new building. Do our testing systems require recalibration after the move?".
|
|
The Plastics Testing Solutions brochure is a 40-page, applications-focused, and standards-based brochure. Important standards such as ISO 527-1, -2, -3, ISO 11443, ISO 75, ASTM D638, Astm D3835, are covered in a detailed testing challenge and solution format. The brochure addresses the most prominent and widely-used standards in the materials testing industry for plastics. Test types such as Impact, Rheology, Thermo-Mechanical, Specimen Preparation, Mechanical Testing, Dynamic/fatigue, and Hardness are described in great detail.
|
|
Catalog Number 2715-001
Rated capacity 2.5 kN (250 kgf, 500 lbf)
|
|
|
|
This issue of TechNotes includes an article on Project 2.6g 329m/s. It also contains a Technical Tip on Keep it Consistent and a question with answer "Q: What is a durometer? Is it an instrument or a measurement?".
|
|
Instron® hydraulic wedge grips provide an innovative solution for high capacity testing and deliver enhanced gripping performance, usability, and operator safety.
|
|
Thermoplastische Werkstoffe werden als Flüssigkeiten unter Einwirkung von Temperatur und Druck verarbeitet. Die Fließfähigkeit des geschmolzenen Materials unter Druck bei bestimmten Temperaturen spielt in der Polymerforschung und -technik eine grundlegende Rolle. Die Schmelzindexprüfgeräte aus der CEAST-Baureihe von Instron sind speziell für die einfache und genaue Bestimmung der Fließeigenschaften von Kunststoffen nach den entsprechenden internationalen ISO- und ASTM-Normen konzipiert.
|
|
This issue of TechNotes includes an article on the Graphene - The Miracle Material?. It also contains a Technical Tip on Event Log Files and a question with answer "Q: Some Bluehill® calculations don’t show a result when I think they should. Where can I find information on the calculations?".
|
|
Manual for Instron Model 4500 Testing System. [Manual Number: M10-94500-1]
|
|
Manual for Instron Model 5588 Load Frame. [Manual Number: M10-25588-1]
|
|
Manual for Instron Model 5583 Load Frame. [Manual Number: M10-25583-1]
|
|
Manual for Instron Model 4483 Load Frame. [Manual Number: M10-24483-1]
|
|
Manual for Instron Model 4468 Load Frame. [Manual Number: M10-24468]
|
|
Manual for Instron Series 4460 Table-Top Load Frames. [Manual Number: M10-24400-1]
|
|
Manual for Instron Series 4200 Load Frames Model 4210. [Manual Number: M10-24210]
|
|
Manual for Instron Series 4200 Load Frames Model 4206. [Manual Number: M10-24206-1]
|
|
Manual for Instron Universal Testing Instruments Models 4505 and 4507 Load Frames. [Manual Number: M10-4500-5]
|
|
Manual for Instron Universal Testing Instruments Models 4210 and 4202. [Manual Number: M10-4200-1(D)]
|
|
Manual Instron Universal Testing Instrument Model 1137. [Manual Number: M10-1137-1]
|
|
Manual for Instron Universal Testing Instrument Model 1135. [Manual Number: M10-1135-1]
|
|
Manual for Instron Universal Testing Instrument Model 1130. [Manual Number: M10-1130-1(B)]
|
|
Manual for Instron Model 5568 Load Frame. [Manual Number: M10-25568-1]
|
|
Manual for Instron Model 4488 Load Frame. [Manual Number: M10-24488-1]
|
|
Manual for Series 4480 Floor Model Load Frames 4481, 4482, 4484, 4485 [Manual Number: M10-24480-1]
|
|
Manual for Models 1127 and 1128. [Manual Number: M10-1127 1128-1(A)]
|
|
Manual for Model 1125. [Manual Number: M10-1125-1(C)]
|
|
Manual for Model 1123. [Manual Number: M10-1123-1(A)]
|
|
Manual for Model 1122. [Manual number: M10-1122-1(B)]
|
|
Die Untersuchung von neuartigen
Biomaterialien und
Gewebe-Engineering-Produkten steht
weltweit im Zentrum der Forschung.
Knochen, Weichgewebe wie z.B. Sehnen,
Bänder, Haut, Muskeln oder Arterien,
Ersatzbiomaterialien und künstlich
hergestellte Gewebe und strukturelle
Gerüste werden zur Bestimmung ihrer
Eigenschaften und zur Charakterisierung
mechanischen Prüfungen unterzogen.
Solche Prüfungen reichen von einfachen
Zug-, Druck- oder Biegeprüfungen über
dynamische Charakterisierungsprüfungen
auf Ermüdungsprüfsystemen bis hin zu
komplexen planaren, biaxialen Prüfungen.
|
|
Zu medizinischem Verbrauchsmaterial
gehören zum Beispiel Spritzen, Nadeln,
Nahtmaterial, Klammern, Verpackungen,
Katheter, medizinische Handschuhe,
Mäntel, Masken, Klebstoffe und Dichtmittel
für die Wundversorgung und eine Vielzahl
weiterer Vorrichtungen und Geräte, die in
einem Krankenhaus oder bei operativen
Eingriffen verwendet werden. Je nach Art
der Vorrichtung können Zug-, Druck oder
Biegeprüfungen als dynamische Prüfungen oder
Ermüdungsprüfungen, Schlagprüfungen oder
Torsionsprüfungen erforderlich sein.
|
|
Es gibt eine Vielzahl unterschiedlicher implantierbarer
Vorrichtungen, angefangen von kardiovaskulären,
endovaskulären, neurovaskulären Stents und den
zugehörigen Einbringungssystemen über
Herzklappenimplantate und Schrittmacher bis hin zu
Augen- und Ohrenimplantaten, wie z.B.
Intraokular- oder Kontaktlinsen. An diesen
Implantaten werden unterschiedlichste Prüfungen
durchgeführt, zum Beispiel statische Zug- oder
Druckprüfungen der Metalle selbst, Biegeprüfungen
an den kompletten Vorrichtungen bis hin zu
Ermüdungsprüfungen des Stentmaterials und der
dynamischen Simulation pulsierender Drücke.
|
|
Instron® verfügt über umfangreiche Erfahrung
auf dem Gebiet der mechanischen Prüfung in
der Orthopädie - von grundlegenden statischen
Prüfungen an den Rohstoffen über die Einleitung
stoßartiger Belastungen in Gelenkkomponenten
bis hin zu komplexen Simulationen zur Analyse der
Ermüdungs- und Verschleißeigenschaften in vivo.
In allen Phasen der Implantatentwicklung erfüllen
unsere Prüflösungen eine Vielzahl von Anforderungen
auf dem Gebiet der Orthopädie. Dazu gehört z.B.
die Untersuchung von Hüftgelenksimplantaten,
Wirbelsäulenimplantaten und Vorrichtungen zur
Behandlung von Traumata und für die Osteosynthese.
|
|
Dieser Artikel aus dem Bereich Biomedizin befasst sich mit einem neuen Werkstoff für künstliche Hüften. Außerdem enthält er einen Techniktipp zum Simulieren der physiologischen Bedingungen von Implantaten und beantwortet die Frage „In welchen Prüfnormen finde ich Richtlinien und Anforderungen zur Entwicklung und Herstellung von Hüftgelenkimplantaten“.
|
|
Kunststoffe sind faszinierende Materialien. Sie haben die einzigartige Eigenschaft, schon bei der Erhitzung auf relativ niedrige Temperaturen zu fließen.
Kunststoffe können zu einer Vielzahl von Formen für unterschiedlichste Anwendungen geformt werden. Ihre Fließeigenschaften während dieses Prozesses
sind komplex und werden durch viele Parameter beeinflusst. Mit der CEAST SmartRHEO-Reihe liefert Instron® umfassende und effektive Prüflösungen für
Kunststoffanwendungen und Industrie. Dieses Kapillarrheometer simuliert die Prozessbedingungen und misst das Fließverhalten von Kunststoffmaterialien,
das die Rheologie der Materialien charakterisiert.
|
|
Understand what the true benefits and advantages are of updgrading your existing Instron system with a 5900 EXTEND upgrade.
|
|
5900 EXTEND upgrade packages are available for Instron models 4204, 4206, 4505, 4507, 6025, 6027; and 4400/5500/5800 Series Table and Floor model systems. The 5900 upgrade is a modular design that is easy to install and provides options such as additional strain cards, multi-channel data acquisition, and analog outputs.
|
|
This issue of TechNotes includes an article on the Importance of Testing in an Ever-Changing World. It also contains a Technical Tip on the Importance of Accurate Alignment and a question with answer "Q. In these days of increased awareness of the environment, why does Instron still use “standby” modes on your systems?".
|
|
Der ElectroPuls™-Tower enthält die Steuerelektronik und den Leistungsverstärker für den Betrieb des ElectroPuls- Systems. Der ElectroPuls-Tower mit seiner Hard- und Firmware baut auf der leistungsstarken Instron®- 8800 Controller-Familie auf, von der bisher über 5000 Einheiten ausgeliefert wurden. Der Controller ist über eine schnelle GPIB-Schnittstelle mit dem PC verbunden und kann mit zusätzlichen Datenerfassungskanälen erweitert werden.
|
|
SGS International Certification Services
certifies Instron Corporation Quality Management System meets ISO 9001:2008 requirements.
Valid until September 12, 2014
|
|
[Manual Number: 10-13-2(TM)]
|
|
Das neu entwickelte CEAST AlOxide® von Instron eignet sich für die Bestimmung der Vicat Erweichungstemperatur und der Wärmeformbeständigkeit von Kunststoffen bei bis zu 500 °C und
ermöglicht damit auch Messungen an hochtemperaturbeständigen Thermoplasten wie PEEK. Dabei erfolgt der Wärmeeintrag über hitzebeständige Aluminiumoxidpartikel im Wirbelbett anstatt – wie in herkömmlichen Geräten – über Silikonöl, dessen maximale Einsatztemperatur meist nur 300 °C beträgt. Die Aufnahme des Verfahrens in die einschlägigen EU-Normen steht bevor.
|
|
In dieser Ausgabe: Teil 1 – Nutzen Sie das Potential Ihrer Spannzeuge zur Verbesserung der Produktivität und Wiederholbarkeit?
So können pneumatische Spannzeuge die Produktivität und Wiederholbarkeit fördern
Aufgrund der aktuellen wirtschaftlichen Lage lohnt es sich, kleine Investitionen zu tätigen, die langfristige Kosteneinsparungen durch eine höhere Produktivität ermöglichen. Eine höhere Wirtschaftlichkeit ist ein Weg, um Kosten zu sparen. Deshalb haben wir bei der Entwicklung der pneumatischen Spannzeuge besonders auf die Produktivität geachtet.
|
|
The Instron RX Systems are the result of a partnership between Instron, a leading provider of equipment that evaluates
mechanical properties of materials and components and Machine Solutions Incorporated (MSI), an innovative manufacturer
of proprietary mechanical solutions for the medical device industry. At the core of the Instron RX Systems are Instron’s 5900
Series universal test frame and MSI’s proprietary segmental compression mechanism. The system can be used to generate
standard tensile, compression, flexure, peel data, as well as radial stiffness and radial strength from 12 points of contact
with the RX fixture. This data is a critical measurement during expansion and compression of interventional devices.
|
|
This issue of TechNotes includes an article on Geomembranes - Protecting Our Water from Our Waste. It also contains a Technical Tip on Accurate Testing Starts with the Preload and a question with answer "Q. How can I be sure that, when I update or upgrade my Bluehill software, the results I’m getting with the new product are the same as the results I was getting with the old one?
".
|
|
Instron® Industrial Series Compression Platens are designed to maximize compression testing performance. These high-strength, versatile platens are available in both plane and self-aligning models, and can be easily configured with Instron and other static universal testing machines.
|
|
Dieses Thema mit dem Schwerpunkt Kunststoff enthält auch einen Artikel über Grüner Kunststoff: Das Ende der Müllhalde? Es enthält zudem einen technischen Hinweis zum Schneiden und Stanzen von Proben sowie die Fragestellung: „Die Zahlenwerte meiner Poissonzahl unterliegen starken Schwankungen. Was kann ich tun?“
|
|
This issue of TechNotes includes an article on Advances in Crash Testing. It also contains a Technical Tip on Controlling Your Chamber and a question with answer "Q. My specimen is very compliant and I cannot get it to run a fatigue test in load control. What can I do".
|
|
Neues motorbetriebenes Pendelschlagwerk ermöglicht höhere
Produktivität und Bedienersicherheit.
|
|
Vielseitig einsetzbare Spannzeuge bieten bessere Spanneigenschaften
und vereinfachen das Einspannen großer Proben.
|
|
Neue Bluehill® 3 Materialprüfsoftware von Instron erhöht Effizienz bei der Konzeption,Durchführung und Auswertung von Versuchen.
|
|
ASTM D 4255 describes both 2 Rail and 3 rail methods of determining the in-plane shear strength of a composite laminate panel. In the 2 Rail test (Method A) a laminate panel specimen is clamped between loading plates and yokes and then subject to shear loading. Measurement of shear strain requires the use of strain gauges on the specimen.
|
|
ASTM C 273 describes a method of determining the shear strength of a sandwich core panel. The test the specimen is bonded to thick loading plate blocks and is subject to shear loading applied via the blocks.
|
|
The Iosipescu shear test is used to determine the shear properties of composite materials. Depending on the orientation of the specimen relative to the coordinate system of the material (i.e. the fi ber lay-up either in-plane or interlaminar shear properties can be determined).
These shear properties can include: shear modulus of elasticity,transition strain, and ultimate shear stress and strain.
|
|
Interlaminar shear testing is a simple test on, easy to prepare,polymer composite specimens that gives a measure of the strength of the bond between fibers and matrix. Another common test for polymer composites is fl exure testing. The Instron® Modular Flexural and Interlaminar Shear Strength (ILSS) bend fi xture system, with a range of interchangeable anvils, is suitable for testing to a number
of international standards, including ASTM D2344, D790, EN 2562, EN 2563, ISO 14125, and ISO 14130.
|
|
The “Airbus CAI” fi xture is used to test the impact resistance of carbon and other fi ber-reinforced plastic (CFRP) composite laminates. These materials are prone to great reduction in compressive strength even when the impact load is insuffi cient to cause visible damage. The post-impact compression test is used widely to assess the relative performance of different composite laminates with different fi ber matrix combinations. In the fi rst part of the test the laminates are subjected to low-velocity impact loading simulating tool drops and fl ying debris. Specimens then undergo a compression after impact(CAI) test on an electromechanical or servohydraulic testing machine.
|
|
ASTM D 1781 describes a method of measuring the strength of the adhesive bond between the core and the facing of a honeycombcore panel. The Instron® climbing drum peel fixtures meet the requirements of ASTM D 1781. Designed with a standard fitting, they can be used on any standard Instron machine. The fixtures are robust and durable, and can be used inside an environmental chamber over a wide temperature range.
|
|
The anti-buckling fixture was originally designed for rigid plastics per ASTM D 695, reinforced plastics per ASTM D 3846. It was also extended and used for high-modulus composites. Boeing then adapted the fixture so that it would be self supported between two platens to ensure consistent perpendicularity of the fixture.
The SACMA standard followed the Boeing design with an added alternative support fixture with a cutout, which would allow bonded strain gages to be used at the center of the specimen for a more precise strain measurement.
|
|
Compression testing of composites without anti-buckling guide plates, is often preferred as the free unsupported length is more representative of true compression behavior. This method relies on the accuracy of the alignment between the upper fixture and the lower fixture while introducing the compression load. In addition, the natural failure process of the specimen will induce high lateral forces that must be resisted to ensure that forces remain in true compression. Therefore, the principle behind the IITRI, Wyoming Modified Celanese and Combined Loading Compression fixtures is essentially the same.
Where they are different, is the way the compression load is being introduced – either by shear transfer from jaw faces to specimen, or a combination of shear and end loading. This is the primary difference with the CLC fixture where the shear load component is from the tightening of the screws which is combined with end loads introduced directly. The IITRI and Celanese rely on the self tightening effect from the wedge jaw faces. The Celanese fixture also allows for preloading the jaw faces by manual screws when the specimen is being installed, while the IITRI also includes end bars that could be used to introduce end loads to the specimen.
In terms of usability, the IITRI allows the largest specimens, up to 38 mm wide, but is the heaviest of the fixtures. The CLC is conceptually the simplest but care must be exercised to ensure the specimen is properly located and improper or uneven tightening of the clamping screws can affect results. The Celanese is a neat compact fixture but is limited to only 12.7 mm (0.5 in.) wide specimens.
|
|
ASTM C 297 describes a method of determining the bond strength between the facing and core of a sandwich core panel or the strength of the core itself, if the bond strength between the facing and the core is suffi ciently strong. The specimen is bonded to thick loading blocks and then subject to
tensile loading applied via the blocks.
|
|
The MFX 500 is a high-resolution, automatic contacting extensometer that may be used to measure modulus, offset yields, and plastic (non-proportional) elongation to failure for many types of specimens. Automatic control is facilitated using Bluehill® 2 Software, and allows the operator to open and close the arms, set the reference arm position, along with the gauge length.
|
|
Screw side-action grips provide a very simple and efficient method for holding test specimens in a wide range of applications. The dual - acting design of 2710-100 series grips means that jaw faces can be adjusted to accommodate different specimen thicknesses. This ensures that the line of tensile force remains concentric with the grip body. They can be equipped with a selection of interchangeable grip jaw faces in various sizes and choice of surfaces including smooth ground, rubber-coated and serrated. Line contact and special coated faces are also available.
The unique ‘snap-on’ jaw face attachment makes changing faces extremely quick and simple.
|
|
Diese Ausgabe enthält den Artikel „Der Turm von Babel: Wie hoch war er wirklich?“. Zudem finden Sie darin einen Techniktipp über universelle Schutzblenden und die Antwort auf die Frage „F. Kann ich mich auf meine Dehnungsdaten verlassen, wenn sie von der Traversenposition abgeleitet werden, und nicht von einem Dehnungsaufnehmer stammen?“.
|
|
Catalog number 2717-069
|
|
Describes the test process used to ensure that Bluehill calculations are valid.
|
|
Bluehill 3 software is developed using professional standards that are included in this document.
|
|
This issue of TechNotes includes an article Full Fluid Jacket – Liquid Body Armor. It also contains a Technical Tip on Don’t Let a Blemished Tup Impact Your Results and a question with answer "Q. When looking at my instrumented impact test data, which result should I focus on more– peak load, energy at peak load, or time to peak load?".
|
|
|
|
Over the past decade, the medical device
and biomaterials industries have
undergone tremendous amounts of
innovation and change. Materials and
technologies have evolved to the point
where surgeons are placing small metal
stents weighing a few grams into the
neurovascular system (in the brain!) to help
patients avoid strokes caused by plaque or
arterial buildup. Correspondingly, there have
been substantial increases in regulatory
involvement to ensure safety and efficacy in
all devices. These evolutions have translated
into a growing requirement for full evaluation
of products from concept to product release
within the research labs of medical device
manufacturers around the world.
|
|
the-Laminate/ Coupon-Proben
-Prüfung bei hohen/niedrigen Temperaturen
-Spannvorrichtungen
-Ermüdung und Bruch
-Ausrichtung
-Fasern und Faserbündel
-Schlagprüfung
-Rheologische und thermomechanische Prüfung
-Serviceleistungen
|
|
A compilation of Instron-grown technical tips, customer interaction around shared problems & solutions, and event updates on where Instron will be and when.
|
|
Die hydraulischen seitlich wirkenden Spannzeuge von Instron®
sind eine innovative Lösung für Prüfungen mit hohen Prüfkräften.
Im Vergleich zu herkömmlichen Spannzeugausführungen bieten
sie eine verbesserte Einspannleistung, Benutzerfreundlichkeit und
Bedienersicherheit. Diese hoch entwickelten Spannzeuge sorgen
für eine konstante Klemmkraft, die senkrecht zur Prüfrichtung auf
die Probe wirkt und von der Zugkraft unabhängig ist.
|
|
Instron® stellt die MPX-Serie der motorbetriebenen
Pendelschlagwerke vor, die optimal für die Prüfung von Metallen
nach Charpy und Izod geeignet sind. Die Bedienung der in
Kapazitäten zwischen 300 und 900 J erhältlichen Maschinen ist
sicher, schnell und einfach. Mit der MPX wird standardmäßig die
Fracta™ - Software geliefert, die eine einfache Datenerfassung und
Berechnung der Energie ermöglicht. Das System kann zudem leicht
auf die Datenerfassungssoftware Impulse™ aufgerüstet werden.
Diese Software erfasst mit Kraft- und Geschwindigkeitsaufnehmern
Daten, analysiert diese und erstellt einen Bericht mit den
Ergebnissen. Das MPX-System ist CE-konform.
|
|
The “Boeing CAI” fixture is used to test the impact resistance of carbon and other fiber-reinforced polymer composite laminates. These materials
are prone to great reduction in compressive strength, even when the impact load is insufficient to cause visible damage. The post-impact
compression test is used to assess the relative performance of different composite laminates with different fiber matrix combinations. Laminates
are subjected to low-velocity impact loading simulating tool drops and flying debris or may be subjected to an out-of-plane static indentation
(ASTM D 6264 / D 6264M). Specimens then undergo a compression after impact (CAI) test on an electromechanical or servohydraulic testing machine.
|
|
Das System ElectroPulsTM E10000 ist ein modernes, komplett elektrisch betriebenes Prüfsystem für die dynamische und statische Prüfung einer Vielzahl unterschiedlicher Werkstoffe und Bauteile. Es beinhaltet eine leistungsstarke digitale Steuer- und Regelelektronik von Instron, einen Dynacell -Kraftaufnehmer, Bediensoftware sowie die neuesten Entwicklungen in der Prüftechnik - mühelose Regelkreisoptimierung auf der Basis der Probensteifigkeit, elektrische Traversenverstellung, einen T-Nuten-Tisch für flexible Versuchsaufbauten und zahlreiche andere benutzerorientierte Eigenschaften. Das System wird mit einer Einphasen-Wechselstromversorgung gespeist und benötigt für den Basisbetrieb keine weitere Medienversorgung (wie zum Beispiel Druckluft, Hydrauliköl oder Wasser).
|
|
Das System ElectroPulsTM E10000 Linear-Torsion ist ein modernes, komplett elektrisch betriebenes Prüfsystem für die dynamische und statische Prüfung einer Vielzahl unterschiedlicher Werkstoffe und Bauteile. Es beinhaltet eine leistungsstarke digitale Steuer- und Regelelektronik von Instron, einen biaxialen Dynacell -Kraftaufnehmer, Bediensoftware sowie die neuesten Entwicklungen in der Prüftechnik - mühelose Regelkreisoptimierung auf der Basis der Probensteifigkeit, elektrische Traversenverstellung, einen T-Nuten-Tisch für flexible Versuchsaufbauten und zahlreiche andere benutzerorientierte Eigenschaften. Das System wird mit einer Einphasen-Wechselstromversorgung gespeist und benötigt für den Basisbetrieb keine weitere Medienversorgung (wie zum Beispiel
Druckluft, Hydrauliköl oder Wasser).
|
|
Designed to suit the ElectroPuls™ E10000 Linear-Torsion, the 2742-305 pneumatic
wedge-action grips are suitable for tension, compression, reverse-stress, and torsion
testing on a wide range of specimens and materials. The grips are pneumatically operated and the
open-fronted design provides easy specimen insertion, positioning,and clamping.
|
|
Designed to suit the ElectroPuls™ E10000 Linear-Torsion, the 2742-304 pneumatic
wedge-action grips are suitable for tension, compression and reverse-stress testing
on a wide range of specimens and materials. The grips are pneumatically operated and the open-fronted design provides easy specimen insertion, positioning,
and clamping.
|
|
Die Zugeigenschaften von Nitinol können mit Hilfe der
ASTM F2516 “Standard Test Method for Tension Testing of
Nickel-Titanium Superelastic Materials” untersucht werden.
Dieser Standard spezifiziert ein Verfahren, mit dem obere
und untere Plateau-Festigkeit, Zugfestigkeit und Dehnung
dieses superelastischen Materials bestimmt werden
können. Das Prüfverfahren beinhaltet eine Reihe von
Herausforderungen bei der praktischen Durchführung der
Prüfung.
|
|
Die pneumatisch betätigten Spannzeuge des Typs 2712-019 von Instron eignen sich mit einer
Nennkraft von 250 N speziell für die Prüfung biologischer Gewebeproben und anderer Probekörper
aus dünnen und/oder weichen Materialien.
|
|
Die Aufschlagbeständigkeit ist für Hersteller eine der wichtigsten Eigenschaften von Werkstoffen, die sich sowohl während der Produktentwicklung wie bei der
Qualitätssicherung kosteneffektiv prüfen lässt. Da Komponenten bereits bei Belastungswerten unterhalb der kritischen Bruchspannung versagen können, ist eine
genaue Bestimmung der Ausbreitung von Schäden durch die Schlageinwirkung erforderlich. Mit der kombinierten Erfahrung von CEAST verfügt Instron® über mehr als
50 Jahre Erfahrung in der Entwicklung von Pendelschlagwerken.
|
|
This issue of TechNotes includes an article The Burj Khalifa – Cast in Concrete. It also contains a Technical Tip on Specimen Support in Rockwell Testing and a question with answer "Q. There’s a new acronym in town. What is NADCAP?".
|
|
The 5th Edition Accessory Catalog
|
|
Bluehill® 3 – Simplicity with Power
|
|
Diese Ausgabe enthält einen Artikel über das Institute of Research of Iron and Steel. Außerdem finden Sie die Antwort auf die Frage „Beim Prüfen einiger Proben, nehmen die Dehnungswerte scheinbar ab, wenn sich die Probe streckt. Könnte dieser Effekt durch Rutschen des Dehnungsaufnehmers entstehen?“.
|
|
Instron,a division of ITW Ltd, has been assessed and certified as meeting the requirements of ISO 9001:2008.
|
|
The Expansion Channel Module, Model 2210-920, allows users to add up to eight channels of signal conditioning and control. As an add-on to a basic 5900 system -- configured for load, extension, and up to three additional channels -- the Expansion Module provides up to a total of 13 transducers for simultaneous monitoring, feedback, and control. (Bluehill® 3 required)
|
|
This issue of TechNotes includes an article on composite materials that copy the body’s ability to bruise and self heal when damaged. It also contains a Technical Tip on Perpendicularity in Rockwell Testing and a question with answer "Q. How can I minimize variability when testing stiff materials such as composites?".
|
|
Das Bluehill 3 Anwendungsmodul für Metalle bietet eine umfassende Plattform zur Messung, Prüfsteuerung und Berichtserstellung, die speziell auf Prüfungen an metallischen Werkstoffen zugeschnitten ist. Das Anwendungsmodul für Metalle enthält vorkonfi gurierte Prüfmethoden und Begleitdokumentation zu einer Reihe wichtiger, international anerkannter Normen für diese Branche.
Diese Methoden und Begleitdokumentation lassen sich nach der Installation und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
|
|
Das Bluehill 3 Anwendungsmodul für Kunststoffe bietet eine umfassende Plattform zur Messung, Prüfsteuerung und Berichtserstellung, die speziell auf Prüfungen an Kunststoffen zugeschnitten ist. Das Anwendungsmodul für Kunststoffe enthält vorkonfi gurierte Prüfmethoden und Begleitdokumentation
zu einer Reihe wichtiger, international anerkannter Normen für diese Branche.
Diese Methoden und Begleitdokumentation lassen sich nach der Installation und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
Vorkonfigurierte Prüfmethoden
• ASTM D638 Standard Test Method for Tensile Properties of Plastics
(Prüfverfahren für die Zugeigenschaften von Kunststoffen)
• ASTM D695 Standard Test Method for Compressive Properties of Rigid Plastics
(Prüfverfahren für die Druckeigenschaften von starren Kunststoffen)
• ASTM D790 Standard Test Method for Flexural Properties of Unreinforced
and Reinforced Plastics and Electrical Insulating Materials (Prüfverfahren
für die Biegeeigenschaften von unverstärkten und verstärkten Kunststoffen
sowie elektrischen Isolationsmaterialien)
• ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic
Sheeting (Prüfverfahren für die Zugeigenschaften von dünnen Kunststofftafeln)
• ASTM D1894 Standard Test Method for Static and Kinetic Coeffi cients
of Friction of Plastic Film and Sheeting (Prüfverfahren für statische und
kinetische Reibungskoeffi zienten von Kunstfolie und Tafeln)
• ASTM D6272 Standard Test Method for Flexural Properties of Unreinforced
and Reinforced Plastics and Electrical Insulating Materials by Four-Point
Bending (Prüfverfahren für die Biegeeigenschaften von unverstärkten und
verstärkten Kunststoffen sowie elektrischen Isolationsmaterialien durch
Vierpunkt-Biegeversuche)
• ISO 178 Kunststoffe — Bestimmung der Biegeeigenschaften
• ISO 527-2 Kunststoffe — Bestimmung der Zugeigenschaften — Teil 2:
Prüfbedingungen für Form- und Extrusionsmassen
• ISO 527-3 Kunststoffe — Bestimmung der Zugeigenschaften — Teil 3:
Prüfbedingungen für Folien und Tafeln
• ISO 604 Kunststoffe — Bestimmung von Druckeigenschaften
|
|
Das Bluehill 3 Anwendungsmodul für Verbundwerkstoffe bietet eine umfassende Plattform zur Messung, Prüfsteuerung und Berichtserstellung, die speziell auf Prüfungen an Verbundwerkstoffen zugeschnitten ist. Das Anwendungsmodul für
Verbundwerkstoffe enthält vorkonfi gurierte Prüfmethoden und Begleitdokumentation zu einer Reihe wichtiger, international anerkannter Normen für diese Branche.
Diese Methoden und Begleitdokumentation lassen sich nach der Installation und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
|
|
Das Bluehill 3 Anwendungsmodul für Klebstoffe ist eine leistungsfähige Plattform zur Messung, Prüfsteuerung und Berichterstellung speziell für Klebstoffe und andere Komponenten, bei denen die Adhäsion ein zentraler Aspekt des Werkstoffs ist. Das Anwendungsmodul für Klebstoffe enthält vorkonfi gurierte Prüfmethoden und Begleitdokumentation zu einer Reihe wichtiger, international anerkannter Normen für diese Branche. Diese
Methoden und Begleitdokumentation lassen sich nach der Installation
und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
Vorkonfigurierte Prüfmethoden
• ASTM D1876 Standard Test Method for Peel Resistance of Adhesives
(Prüfverfahren für den Schälwiderstand von Klebstoffen (T-Peeltest))
• ASTM D903 Standard Test Method for Peel or Stripping Strength of
Adhesive Bonds (Prüfung des Schäl- oder Abstreifwiderstandes von
Klebverbindungen)
• ASTM D3163 Standard Test Method for Determining Strength of
Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by
Tension Loading (Bestimmung der Scherfestigkeit von starren
Überlappungsklebungen von Kunststoffen bei Zugbelastung)
• ISO 11339 Klebstoffe — T-Schälprüfung für geklebte Verbindungen aus
fl exiblen Fügeteilen
• ISO 4578 Klebstoffe — Bestimmung des Schälwiderstandes von
hochfesten Klebeverbindungen — Rollen-Schälverfahren
• ISO 813 Elastomere und thermoplastische Elastomere: Bestimmung der
Haftkraft an einem starren Träger — 90°-Schälverfahren
• BS EN 1465* Klebstoffe: Bestimmung der Zugscherfestigkeit von
Überlappungsklebungen
• BS EN 1719 Klebstoffe für Papier, Verpackung und Hygieneprodukte —
Messung der Oberfl ächenklebrigkeit von Haftklebstoffen — Bestimmung
der Oberfl ächenklebrigkeit nach der Schlaufenmethode
• BS EN 1939 Klebebänder: Bestimmung der Klebekraft
|
|
Das Bluehill 3 Anwendungsmodul für Biomedizinische Materialien/
Medizintechnische Geräte bietet eine umfassende Plattform zur
Messung, Prüfsteuerung und Berichtserstellung, die speziell auf
Prüfungen an Materialien und Geräten aus den Bereichen Biomedizin
und Medizintechnik zugeschnitten ist. Das Anwendungsmodul für
Biomedizinische Materialien/Medizintechnische Geräte enthält
vorkonfi gurierte Prüfmethoden und Begleitdokumentation zu einer Reihe wichtiger, international anerkannter Normen für diese Branche. Diese Methoden und Begleitdokumentation lassen sich nach der Installation und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
Vorkonfigurierte Prüfmethoden
• ASTM F2516* Standard Test Method for Tension Testing of
Nickel-Titanium Superelastic Materials (Prüfverfahren für
Zugfestigkeitsprüfung von superelastischen Nickel-Titan-Werkstoffen)
• ASTM F2256 Standard Test Method for Strength Properties of
Tissue Adhesives in T-Peel by Tension Loading (Prüfverfahren für die
Schälfestigkeit von Gewebeklebern durch Zugbelastung)
• ASTM F2458 Standard Test Method for Wound Closure
Strength of Tissue Adhesives and Sealants (Prüfverfahren für die
Wundverschlussfestigkeit von Gewebeklebern und Dichtmitteln)
• ASTM F2606 Standard Test Method for Three-Point Bending of
Balloon Expandable Vascular Stents and Stent Systems
(Dreipunkt-Biegeprüfungen an Ballon-expandierenden Stents und
Stentsystemen)
• ASTM F88 Standard Test Method for Seal Strength of Flexible
Barrier Materials (Prüfverfahren für Siegelnahtfestigkeit fl exibler
Trennmaterialien)
• EN 455-2 Medizinische Handschuhe zum einmaligen Gebrauch.
Anforderungen und Prüfung der physikalischen Eigenschaften
|
|
Das Bluehill 3 Anwendungsmodul für Elastomere bietet eine umfassende Plattform zur Messung, Prüfsteuerung und Berichtserstellung, die speziell auf Prüfungen an Elastomeren zugeschnitten ist. Das Anwendungsmodul für Elastomere enthält vorkonfi gurierte Prüfmethoden und Begleitdokumentationzu einer Reihe wichtiger, international anerkannter Normen für diese Branche.
Diese Methoden und Begleitdokumentation lassen sich nach der Installation und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
|
|
Instron® bietet sein Premium-Softwarepaket zur Prüfung von Werkstoffen und Komponenten ist jetzt auch als Schulversion für Universitäten und andere Bildungseinrichtungen an. Dieses Softwarepaket simuliert Spannungs-Dehnungskurven oder Kraft-Wegkurven für eine große Bandbreite von Anwendungen wie Zug-, Druck-, Biegungs-, Schäl-, Reiß-, Reibungs-,
Spannungsrelaxations- und Kriechversuche. Die Schulversion von Bluehill 3 hilft Studenten, ein Verständnis der Materialprüfung zu gewinnen und Daten zu interpretieren. Das Paket enthält mehr als 50 vorkonfi gurierte Prüfmethoden und Simulationsdaten, die den Anforderungen verschiedener internationaler Prüfnormen entsprechen. Die folgende Liste zeigt einige Anwendungen und die
entsprechenden Normen:
• Kunststoffe: ASTM D638, ASTM D790, ASTM D695, ISO 527-2, ISO 527-3
• Elastomere: ASTM D412, ASTM D413, ASTM D575, ISO 37, ISO 34-1
• Metalle: ASTM E8, ASTM A370, ASTM E646, ISO 6892, BS EN 10002-1
• Textilien: ASTM D5034, ASTM D5035, ISO 9073-1, ISO 13934-1, ISO 13936-2
• Klebstoffe: ASTM D1876, ASTM D903, ISO 11339, BS EN 1465, BS EN 1719
• Biomedizinische Materialien und medizintechnische Geräte: ASTM F2516,
ASTM F2256, ASTM F88, ISO 7886-1, BS EN 455-2
• Verbundwerkstoffe: ASTM C1358, ASTM D3410, ASTM D3039, ISO 527-4,
ISO 14125
|
|
Das Bluehill 3 Anwendungsmodul für Textilien bietet eine umfassende Plattform zur Messung, Prüfsteuerung und Berichtserstellung, die speziell auf Prüfungen an textilen Werkstoffen zugeschnitten ist. Das Anwendungsmodul für Textilien
enthält vorkonfi gurierte Prüfmethoden und Begleitdokumentation zu einer Reihe wichtiger, international anerkannter Normen für diese Branche. Diese Methoden und Begleitdokumentation lassen sich nach der Installation und einer Grundlagenschulung sofort für Prüfaufgaben nutzen.
|
|
The 300/400/600 kN Pneumatic Wedge Action Grips feature an open front design, which facilitates easy loading of large specimens - either round or flat. These grips can be used with the SATEC™ Series LX and KN models, as well as 5988 or 5989 electromechanical floor models. An optional adapter kit offers a solution for mounting compression accessories without uninstalling the grips.
|
|
When a testing system is subjected to a force, the entire system (frame, load cell, grips, etc.) deforms. The process of removing this deformation -- leaving only the results of the deformation of the specimen, is fully described in this whitepaper.
|
|
This issue of TechNotes includes an article on Growing Your Own Packaging. It also contains a Technical Tip on Automation: Going Automatic and a question with answer "Q. How Do I Reduce Durometer Hardness Test Variability?".
|
|
Thermoplastische Werkstoffe werden als Flüssigkeiten unter Einwirkung von Temperatur und Druck verarbeitet. Die Möglichkeit, aus Kunststoffen mit den üblichen Umformprozessen eine Vielzahl verschiedener Formen herzustellen, spielt bei der Erforschung und Anwendung von Polymeren eine fundamentale Rolle. Die innovativen Kapillar-Rheometer aus der Produktreihe CEAST SmartRHEO von Instron® sind für die genaue Bestimmung der rheologischen Eigenschaften von Polymeren konzipiert.
|
|
This issue of TechNotes includes an article on Biomimetic Muscles: New Possibilities From Spider Silk. It also contains a Technical Tip on Rockwell Hardness Testing of Thin Materials and a question with answer "Q. Do I have any options to increase productivity in Brinell Testing?".
|
|
Der Sonderforschungsbereich 747 „Mikrokaltumformen – Prozesse,
Charakterisierung, Optimierung“ der Deutschen Forschungsgemeinschaft
(DFG) beschäftigt sich seit 2007 mit der Bereitstellung von
Prozessen und Methoden für die umformtechnische Herstellung
metallischer Mikrokomponenten. Im Teilprojekt B4, Bauteilfestigkeit,
in dem drei der Autoren arbeiten, geht es um die statische und
dynamische Untersuchung der mechanischen Eigenschaften von
Mikroproben und -halbzeugen. Die Prüfung derartiger kleiner Prüflinge
erfordert eine an deren Dimensionen angepasste Prüftechnik.
Vor dem Hintergrund dieses besonderen Anforderungsprofils werden
die infrage kommenden unterschiedlichen Prüfmaschinenklassen
vergleichend diskutiert. Zur Durchführung des genannten Projekts
wurde ein Prüfsystem beschafft, welches am geeignetsten erschien,
bestehend aus der elektrodynamischen Prüfmaschine des Typs
Instron ElectroPuls™ E1000 und dem berührungslos arbeitenden
Videoextensometer AVE. In diesem Artikel werden einige Erfahrungen
mit diesem Prüfsystem beschrieben.
|
|
The 2910-056 heavy-duty support table is ideal for table top testing instruments. The table provides a stable and level working surface, increases safety, and distributes the weight of the load frame in a uniform manner. Improved ergonomic conditions for users are an added benefit.
|
|
Instron® testmaster™ 2 Automated Specimen Handling Systems enable a new dimension in testing productivity. Available as either complete turnkey solutions or installed on existing Instron testing instruments, the unique modular design accommodates tensile, flex, and hardness testing. System configurations consist of either a robot or a carousel for rotary specimen handling. Materials tested include metals, plastics, thin films, components, elastomers, and medical devices.
|
|
The Instron® Automated Carousel feeding system is a new approach to handling test specimens. The primary components of the system include a linear feeding system, a rotating specimen storage rack, and a universal testing instrument. The carousel system is ideal for flexible materials, including thin films and flexible tubing. The handling system is a modular unit that conveniently bolts onto a standard 5960 dual column testing system.
|
|
Variable rate springs are becoming more common in vehicle suspensions. This application report examines the process of defining the transition point between the load vs. height curve. This information can then be used to refine the spring manufacturing process to produce more consistent product.
|
|
SRI Quality System Registrar is pleased to announce that it has recently awarded an ISO 9001:2008 Management System certificate to
Instron Industrial Products Group, located in Grove City, Pennsylvania, for design, manufacture, recondition, and retrofit of static hydraulic, torsion, spring, creep, and impact instruments, systems, and accessories for tension, compression, and impact testing, including materials testing software.
|
|
A Compilation of Technical Tips, Questions and Answers, and Customer Features from the TechNotes Newsletter
|
|
Operating a 5900 Series testing system is easier and quicker than ever before. By utilizing the many capabilities of the Productivity Panel, users can perform every test function without relying on a mouse--install a specimen and begin testing without ever stepping away from the machine; customize the soft key buttons to initiate a variety of commands; and configure the panel to display real time results throughout the test.
|
|
Diese Ausgabe enthält einen Artikel über die Unterschiede zwischen Kalibrierung und Verifizierung und darüber, wie Ihr Labor für Untersuchungen gerüstet ist. Außerdem finden Sie Fragen und Antworten zu den Themen „Können Sie ein Dokument ausstellen, in dem bestätigt wird, dass meine Prüfungen eine bestimmte ASTM- oder ISO-Norm erfüllen?“ und „Was bedeutet Akkreditierung und welche Auswirkungen hat sie auf die Prüfnormen?“.
|
|
The Instron® Digital Long-Travel (DXL) extensometer is a high-precision device for measuring strains of highly extensible materials such as elastomers, semi-rigid plastics, and films. The DXL is compatible with most electromechanical testing instruments and easily installed on an Instron system.
|
|
Are you using your grips to improve your safety and
ease of use? How Pneumatic Grips can Help Safety and Ease of Use
|
|
Following is our "Statement of Principles of Conduct" describing the standard of behavior governing all ITW employees and directors. These principles apply to all our business activities around the world.
|
|
Organization, Management and Control Model
|
|
Der Probenhalter 2701-221 mit integrierter Probenausrichtvorrichtung (zum Patent angemeldet) ist eine optionale Zusatzausrüstung für pneumatische, seitlich wirkende Spannzeuge 2712-041 und 042. Die federbetätigten Greifvorrichtungen halten die Probe fest, während der Bediener das Spannzeug vor Beginn der Prüfung schließt. Dadurch werden potentielle Quetschgefahren reduziert, wie sie beim manuellen Festhalten der Probe während des Schließens des Spannzeugs in der Nähe der Spann-backeneinsätze bestehen. Die integrierte Vorrichtung zur Probenausrichtung sorgt für eine wiederhol-bare Justage und spart Zeit bei der Bedienung.
|
|
This hardness application is to be used as a reference tool for converting between popular scales to find tensile strength, wear resistance, ductibility, and other physical characteristics of metallic materials.
|
|
Within the Bluehill User Community Blog, users can gain training tips, search through frequently asked questions, search for solutions to test methods, and post their own questions to the product manager.
|
|
The SATEC Series Model 600HVL high capacity universal testing machine features a dual test space designed for tension, compression, bend, shear, and flexure testing on high-strength materials.
|
|
Diese Ausgabe mit dem Schwerpunkt Biomedizin enthält den Beitrag „Studie zeigt die Unterschiede der Netzmaterialien bei der Behandlung von Hernien“, den Techniktipp „Herausforderungen beim Prüfen biomedizinischer Komponenten“ und Fragen und Antworten zum Thema „Wie begegne ich der Herausforderung des Prüfens medizintechnischer Geräte und Implantate mit unterschiedlichen Geometrien am besten?“
|
|
The manual wedge action grip is designed for easy specimen loading, alignment and positioning. After initial face to specimen contact, gripping force will increase as the testing load increases. Due to Instron®'s design of moving grip bodies, virtually no preload is seen during specimen clamping. This makes them particularly suitable for testing high strength materials,
such as metals and composites, ensuring that specimen
slippage is eliminated.
|
|
Die neueste Version der bekannten Bluehill® Materialprüfsoftware, beinhaltet ein breites Spektrum an maßgeschneiderten Applikations-Lösungen für den Anwender. Bluehill® 3 kann somit individuell auf Ihre Anforderungen zugeschnitten werden.
|
|
SI-1M 450 Joule Motorized Pendulum Impact Testing Machine for testing metals to Charpy and Izod standards.
|
|
Spezifikation 5980 Bodenmodell, zweisäulig
|
|
Spezifikation 5940 Tischmodell, einsäulig
|
|
|
|
Die neuen Universalprüfsysteme der Serie 5900 von Instron®: von Labor-Tischmodellen bis
hin zu Zweisäulen-Bodenmodellen mit bis zu 600 kN Prüfkraft, zugeschnitten für nahezu alle
Anforderungen in der Werkstoff- und Bauteilprüfung.
|
|
|
|
This newest version of the popular Bluehill Materials Testing Software provides a wide range of tailored application
solutions to meet the demands of any level of user.
|
|
The Model C lever arm machine was designed specifically for long term stress-rupture test applications that involve maintaining constant loads for extended periods of time.
|
|
|
|
In dieser Ausgabe finden Sie technische Tipps zu „Warum beim Zugversuch die Ausrichtung so wichtig ist“ und „Härteprüfung an zylindrischen Proben“. Die Fragen und Antworten befassen sich dieses Mal mit „Wie soll ich die so genannte „Toe Compensation“ handhaben“
|
|
Prüfen jenseits der Raumtemperatur
|
|
Die Schlagfestigkeit ist eine der wichtigsten Eigenschaften, die Konstrukteure berücksichtigen müssen, und die wohl am schwierigsten zu quantifizierende. Die
Prüfung der Schlagfestigkeit stellt neben der Lebensdauerermittlung einen zentralen Themenbereich dar, der heute immer wichtiger wird: Produktsicherheit und
Produkthaftung. Mit der Erfahrung von Dynatup® und CEAST blickt Instron® auf 80 Jahre Erfahrung in der Entwicklung von Aufprallprüfsystemen zur Simulation realer
Schlagbedingungen zurück.
|
|
The Difference Between an Instron® Model 3342 and a Chatillon Model LR5K Plus.
|
|
Pneumatische Spannzeuge der Instron® 2712-04x Serie
bieten viele Funktionen und Merkmale, die Einspannleistung,
Nutzbarkeit und Bedienersicherheit verbessern.
|
|
This hardness-focused issue includes a technical tip on "Increasing Efficiency in Knoop and Vickers Testing", a technical tip on "Best Practices: Which Rockwell Scale to Use" and a Q&A on "Q: How far apart should I space each Rockwell hardness test?"
|
|
Die NEUEN 2712-04x pneumatischen, beidseitig wirkenden Spannzeuge
|
|
Manual for Instron models 5941, 5942 and 5943 electromechanical systems.
|
|
|
|
Techniktipp für die Materialprüfung von Metallen
|
|
Techniktipp für Wissenschaft und Universtäten
|
|
Techniktipp für Wissenschaft und Universtäten
|
|
Zubehör für Lebensmittelprüfungen
|
|
Instron® is the premium choice for reconditioned equipment. This literature describes the reconditioning process and features of a Reconditioned Electromechanical System.
|
|
Instron® is the premium choice for reconditioned equipment. This literature describes the reconditioning process and features of a Reconditioned HVL Series.
|
|
The XY Test Stage is useful for testing components, sub-assemblies, or end products that have multiple elements or leads that need to be tested independently of one another; commonly found in the medical device industry. Mounts to most universal testing instruments.
|
|
The component test plate is a large plate with an array of tapped holes that is useful for securing difficult-to-test components for a variety of tensile, compression, peel or other testing. It can be used with most universal testing systems.
|
|
Brochure outlines many of the testing challenges facing the metals industry and illustrates how they are successfully addressed using Instron®’s testing equipment solutions.
|
|
Instron's Bluehill Lite materials testing software is ideally suited for standardized tensile, compression, flexure, peel, tear, friction and simple cyclic test requirements. Bluehill Lite is compatible will all Instron 3300 systems.
|
|
Der universell einsetzbare, hoch auflösende Dehnungsaufnehmer MFX 500 ist besonders robust und deshalb optimal geeignet für fast alle Anwendungen, bei denen die lineare Dehnung gemessen werden muss. Die vom MFX 500 erzeugten Messwerte können für eine Reihe unterschiedlicher Berechnungen verwendet werden, z.B. E-Modul, Versatzstreckgrenze oder plastische (d.h. nicht proportionale) Dehnung bis zum Bruch
|
|
Bei der Entwicklung dieser Spannzeuge hat Instron® eng mit den Nutzern zusammengearbeitet und die Spannzeuge mit zahlreichen neuen Funktionen und Merkmalen aus¬gestattet, die die Bedienung vereinfachen und Sicherheit, Produktivität und die Wiederholbarkeit von Prüfergebnissen verbessern. Mit Nennkräften von 1 kN, 2 kN, 5 kN und 10 kN deckt die neue Bau¬reihe ein breites Spektrum von Prüfanwendungen ab. Dazu zählen unter anderem die Prüfung von Kunststoffen, Folien, Drähten, Tafeln, Textilien, Elastomeren, Bauteilen, Papier und vieles mehr.
|
|
Spannzeuge für Ermüdungsversuche
|
|
The Syringe Test Fixture is designed to meet the test requirements of ISO 7886-1 Annex G for sterile, single-use hypodermic syringes. It can easily be mounted to most universal testing systems.
|
|
Die ElectroPuls™ E10000 und E10000 Linear-Torsion Prüfsysteme
Die neuen innovativen Modelle stehen mit Nennkräften bis 10.000 N zur Verfügung (2250 lbf). Das ElectroPuls™ System E10000 Linear-Torsion hat einen patentierten, kombinierten Linear-Torsions-Antrieb für biaxiale Versuche an Werkstoffen und Bauteilen.
|
|
Solutions for Automated Hardness Testing
|
|
Overview of Wilson Instruments Tukon 2100B, Microhardness tester for Knoop and Vickers testing. Includes detailed specifications, capabilities and recommended options.
|
|
High-Stiffness Support Table for ElectroPuls E1000 and E3000 tabletop test instruments.
|
|
Optimieren der Probenausrichtung
|
|
The Wilson Instruments 574 Rockwell Testers are proven, durable, and reliable performers meeting a range of Rockwell testing applications. Available in Regular, Superfi cial or Twin Scale models, the 574 provides a rugged industrial design, an all-new, easy-to-use control panel, and a built-in USB for easy data transfer to Microsoft® Excel® or other applications. Designed with the best repeatability in its class, the 574 is an affordable, high-precision depth measurement system with proven performance.
|
|
Overview of Wilson-Wolpert Digital Microhardness Series 402MVD testers.
|
|
The Wilson Instruments TESTOR 930, with its user-friendly operator panel, displays hardness values for all common hardness test
procedures. The closed-loop load system eliminates overshoot and combines a fully-automatic controlled test cycle with a broad load range from 1 - 250 kgf. The quick access buttons allow operators access to 99 different test programs for all hardness scales (HR, HB, and HV). In compliance with ISO standards, each program can be set up with user-defined test parameters including test force, application time,conversion, and shape correction. The intuitive user interface and one-touch operation ensures an efficient and reliable test process, while the interchangeable objectives, which range from 20 - 140X, allows for testing a variety of applications.
|
|
Instron® 2712-04x Series Pneumatic grips, packed with
features to enhance gripping performance, usability, and
operator safety.
|
|
This issue includes an article on Central High School and Materials Testing for Young Minds. The technical tip is on "Testing to High or Low Temperatures", and the Q&A is on "The difference between a single-point and a 4-point flexure test".
|
|
Celebrating 40 years as a UKAS-accredited calibration provider to the materials testing community.
|
|
|
|
Pneumatic Adhesive Shear Test Fixture per ISO 13007-2
|
|
The Syringe Test Fixture evaluates the performance of needles or syringe/needle combinations.
|
|
Was ist die Datenerfassungsrate?
|
|
Detailed description of fixture that is designed to evaluate the performance of syringes and syringe/needle combinations. Primary uses are determining breakaway forces at the beginning of injections as well as sustaining forces throughout the injection process.
|
|
Die beste Lösung zum Greifen von Proben mit niedriger Kraft
|
|
5800 Series material testing systems encompass a range of high performance load frames, cutting-edge control and data aquisition electronics, and modular applications software packages.
|
|
This plastics-focused issue includes a technical tip on "What to Consider When Measuring Plastics". The Q&As are "How can I improve the accuracy and repeatability of my Poisson's Ratio results?" and "Can clip-on extensometers affect my strain results when testing thermoplastics?"
|
|
Biomedizin-Anwendungen – Teil 2 von 2
|
|
Ändern sich Ihre Prüfergebnisse, wenn Ihre Prüfer
wechseln?
|
|
Biomedizin-Anwendungen – Teil 1 von 2
|
|
Indicating Resin Acrylic-Bonding-Potential for Tub and Shower Laminates
|
|
Neue Module erweitern die Funktionalität Ihrer Instron-Software
|
|
FDA 21 CFR § 11 Regulations Software Solution – Bluehill® ComplianceBuilder™
|
|
Testing Equipment Company Complements Instron® Product Line
|
|
Joseph Amaral, Instron’s retired President, was awarded The John M. “Tim” Holt Lifetime Achievement Award from the ASTM Committee E28.
|
|
This 4th Edition catalog is designed with a new look and feel - offering full color images of the broad range of materials testing accessories.
|
|
The 9250HV-HT is ideal for impact tests on athletic or industrial helmets, as well as performing shock attenuation and force transmission tests.
|
|
Summary of 5500A Series dual column tabletop systems product enhancements and technical specifications.
|
|
Summary of 5500A Series single column tabletop systems product enhancements and technical specifications.
|
|
These automated testing systems offer advantages over traditional, manually-operating testing systems, including improved productivity and increased volume of specimens tested.
|
|
The 2820 Series of wood bend fixtures are designed in accordance with common International Standards for performing flexure tests on a range of wood products.
|
|
Instron® is the premium choice for reconditioned equipment. This literature describes the reconditioning process and features of a Reconditioned BTE Series.
|
|
Einsatz integrierter Hard- und Softwareprüfsysteme bei Schlagversuchen
|
|
Prüfungen an Elastomeren
|
|
Prüfung metallischer Werkstoffe – Teil 2
|
|
Prüfung metallischer Werkstoffe - Teil 1
|
|
|
|
This add-on compliance solution, which can be integrated with Bluehill® Software, meets regulatory guidelines found in FDA 21 CFR Part 11.
|
|
Prüfen unter extremen Temperaturbedingungen
|
|
Solutions for Biomedical Testing presents a wide range of examples and application solutions for medical devices, biological tissues, biomaterials, orthopaedic devices, hip implants, knee implants, spine, fixation devices, dental materials and implants, and biomechanics such as athletic footwear.
|
|
The latest changes to the ASTM E18 standard require suppliers to verify the performance of ball indenters to meet E18-07 and later compliance.
|
|
Latest changes to the ASTM E18 standard require suppliers to verify
the geometry of indenters to meet E18-07 and later compliance.
|
|
The latest changes to the ASTM E18 standard require users to use E18-07 or later compliant test blocks for hardness testing.
|
|
The 2601 series Linear Variable Differential
Transformer (LVDT) displacement transducers are
measuring devices that measure the displacement of
the load frames of materials testing systems. They
feature an LVDT as the active element, and are
designed for use on both electromechanical and
hydraulic Instron® testing systems.
|
|
|
|
Catalog number 2714-004
Rated capacity 1 kN (100 kgf, 225 lbf)
Suitable for a wide range of linear densities (denier and tex)
|
|
Catalog number 2714-006
Rated capacity 1.6 kN (160 kgf, 350 lbf)
Suitable for a wide range of linear densities (denier and tex)
|
|
The Instron capacitive extensometer measures small changes in length of test specimens at very high temperatures. It has been developed in conjunction with a number of advanced programs throughout the world investigating the properties of materials including alumina, silicon carbide, silicon nitride, carbon/carbon composites and other advanced ceramics.
|
|
The paper provides an overview of 21 CFR Part 11 as it pertains to materials testing, electronic records, and electronic signature procedures for industries regulated by the U.S. Food and Drug Administration (FDA). It describes the key elements of 21 CFR Part 11 and provides a methodology for transitioning your lab to a 21 CFR Part 11 compliant laboratory.
|
|
Die Dehnungskalibrierung trifft eine Aussage über die Leistungsfähigkeit Ihres Systems, besonders, wenn Sie Dehnungsaufnehmer für die Dehnungsmessung einsetzen
|
|
Prüfgeschwindigkeits Kalibrierung Service
|
|
Über die Instron-Gerätekalibrierung Ihres Aufprallprüfgeräts erhalten Sie Aufschluss darüber, wie zuverlässig Ihr System arbeitet. Instron-Aufprallkalibrierungen werden mit Orientierung an den geltenden internationalen Standards ausgeführt.
|
|
Kraft Kalibrierung Service für Materialprüfmaschinen
|
|
Längenänderungs-Messeinrichtung Kalibrierung Service
|
|
Ein Überblick über Instrons weltweite Kalibrierungsdienste sowie der Vorteile unserer Dienstleistungen für Ihr Unternehmen. Weiterhin finden Sie hier nützliche Informationen über ISO 17025, Akkreditierung und Akkreditierungsstellen, zur ILAC-Vereinbarung sowie zu Kalibrierzertifikaten
|
|
This issue features a study conducted on video extensometers, and reveals the benefits over traditional styles.
|
|
Gage repeatability and reproducibility, also known as GR&R, is a type of statistical analysis that is often performed by quality and product engineers as a method of test equipment validation and verification. The purpose of this paper is to highlight a variety of error sources, and provide suggestions and guidelines for conducting a successful GR&R study.
|
|
Manual for Model 4411. [Manual Number: M10-24411-1]
|
|
Manual for MN44 and MN 55 load frames. [Manual Number: M10-2MN44-1]
|
|
Manual for Model 1011. [Manual Number: M10-21011-1]
|
|
Manual for Model 4510. [Manual Number: M10-24510-1]
|
|
Manual for Model 4204. [Manual Number: M10-24204-1]
|
|
Manual for Models 4201 and 4202. [Manual Number: M10-24201-1]
|
|
Instron Pty's Calibration Laboratory is accredited to ISO 17025 for Force and Extension by the National Association of Testing Authorities (NATA), Laboratory Number 3037. NATA holds the original of the certificate on their site at: http://www.nata.asn.au/
|
|
Properly managing your database can speed up data retrieval. This webinar will discuss the Data Manager Tool and how to use Partners Access and Excel Reporting Tools.
|
|
This special issue on metals testing covers technical tips including Protecting Your Investment with Proper Use of Grip Accessories, and New Changes to ASTM E18-07. The Q&A is on better solutions for calculating N-value.
|
|
Instruction Manual for Series 500 digital testers.
|
|
Instron's 9250 drop tower measures energy absorption and impact properties of polymers, metals, composites and more.
|
|
Materials Testing Software for Dynamic and Fatigue Testing
|
|
Mechanical testing of adhesives
|
|
Special offer on Bluehill 2 Static Testing Software
|
|
Mechanical testing of composites
|
|
Mechanical testing of textiles
|
|
Mechanical testing of polymers
|
|
Accreditation Germany IS0 9001
|
|
This issue includes technical tips on "Why Do I See a Negative Load After Clamping My Tensile Specimen?" and "Hardness Testers: Closed-Loop vs. Deadweight". The Q&A is on torsion testing.
|
|
Instron's 3300 single column testing system is ideal for medical device testing, and is engineered to cover a range of testing from 500 N to 5 kN.
|
|
|
|
The RX 550 & RX 650 Systems are the result of a partnership between Instron, a leading provider of equipment that evaluates mechanical properties of materials and components, and Machine Solutions Incorporated (MSI), an innovative manufacturer of proprietary mechanical solutions for the medical device industry. The RX Systems are primarily used for the radial compression of interventional devices, including: balloon expandable stents, self-expanding stents, stent graft products, collagen plugs, embolic
filters, vena cava filters and other basket type filter products.
|
|
This issue includes technical tips on "Indicating the Correct Gauge Length for Your Specimen" and "Using Grips in a Low-Temperature Chamber". The Q&A is on losing power during testing.
|
|
The Pneumatic Marking Station quickly and accurately applies
dot targets to test specimens prior to testing with an
Instron® non-contacting video extensometer.
|
|
W-E402 Series Averaging Axial Extensometers are ideally suited for testing a wide range of materials, including advanced composites. Two independent strain sensors measure axial displacements from opposite sides of the specimen and produce a single averaged output.
|
|
W-E404 Series Transverse Extensometers are designed for measuring transverse displacements. They are self-supporting on the test specimen and will work on any width or diameter specimen from 0 to 25 mm(1 in).
|
|
W-E440 High-Temperature Series extensometers are ideally suited for testing materials such as advanced composites, metals and polymers at elevated temperatures. They incorporate a capacitive sensor that does not require any cooling.
|
|
W-E404-D Transverse Averaging Extensometer is specifically designed for measuring the transverse displacements used in determining the r-value in sheet metal testing.
|
|
W-E402 Series Biaxial extensometers are ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests such as determining Poisson’s ratio.
|
|
This webinar defines Modulus, describes the different modulus calculations available in Bluehill, and describes the slope calculations.
|
|
This issue includes an article on Old Ironsides, as well as a technical tip on tightening your wedge grips. The Q&A is on the difference between ISO and ASTM standards, and how it may affect your testing.
|
|
Eine Broschüre, die eine Temperaturkalibrierung von Klimaschränken und ähnlicher Ausrüstung durch Instrons europäisches Kalibrierlabor beschreibt.
|
|
3300 Single Column Medical Device Testing Systems.
A wide range of solutions to address a variety of biomedical applications from sutures, needles and tubing, to medical packaging and gloves, is offered by Instron.
|
|
The new Instron Standard Video Extensometer(SVE)is a non-contacting extensometer that meets most testing standards for accuracy. The SVE can be used to measure axial strain in a wide variety of materials through failure and provides many advantages over traditional contacting extensometers.
|
|
Upgrade Solutions for Universal Hydraulic Testing Systems.
|
|
WaveMatrix™ is intelligent software designed for fatigue and dynamic testing of materials and components. It delivers flexibility - run everything from a simple static ramp, to cyclic waveforms through to complex multi-step, multi-axial tests
The highly visual environment with integrated tabular screens, clear menu structures, time-based matrix test preview and
configurable live test workspace is designed to be intuitive and instill confidence. Packed with intelligent features, such as data
reduction and built-in project organization, designed to simplify your testing.
|
|
The 2810-412 miniature 3-point bend fixture is designed for Mode II fracture toughness testing. The fixture fully complies with the requirements of SEMI standard G69-0996 ‘Test method for
measurement of the adhesive strength between lead frames and molding compounds for semiconductor packages’.
|
|
This issue includes an article on Fiber Optic Sensors & Sensing Systems, as well as a technical tip on single column and dual column load frames. The Q&A is on the features of our online libary.
|
|
Used to test carbon and aramid fiber reinforced plastic (CFRP) composite laminates.
Conforms to Boeing BSS 7260/ NASA CAI
Catalog Number 2505-003
|
|
Der perfekte Partner für Ihr servohydraulisches Prüfsystem.
Diese Broschüre stellt Ihnen Hydraulikaggregate mit
Förderleistungen von 13 l/min bis 118 l/min und Nennbetriebsdrücken
von 207 bar und 280 bar vor.
|
|
Low Cycle Fatigue 3 (LCF3) offers a flexible workspace designed to run and analyze strain controlled fatigue tests in accordance with ASTM, ISO and BS standards.
|
|
Application report on testing per ASTM E 436; ASTM e 604 & API-5L
|
|
Application report detailing impact testing per ASTM D-3763
|
|
Application report detailing testing per ISO 6603-2
|
|
Application report describing impact testing of compososite decking materials.
|
|
Changes to ASTM Standards in 2007
E18 Rockwell and E10 Brinell
|
|
Flyer describing the 3300 EXTEND Upgrade series for 4200 or 4400 Testing Systems. EXTEND upgrades allow you to keep your existing load frame and accessories, while replacing the older electronics with a new digital controller and choice of advanced testing software or a TouchPanel.
|
|
PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED – PART 5: HEAT AND SELF SEALABLE POUCHES AND REELS OF PAPER AND PLASTIC FILM CONSTRUCTION – REQUIREMENTS AND TEST METHODS
|
|
CONDUIT SYSTEMS FOR CABLE MANAGEMENT – PART 2-4: REQUIREMENTS FOR CONDUIT SYSTEMS BURIED UNDERGROUND
|
|
MEDICAL GLOVES FOR SINGLE USE – PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES (INCLUDING TECHNICAL CORRIGENDUM 1996)
|
|
SELF ADHESIVE TAPES – DETERMINATION OF PEEL ADHESION PROPERTIES
|
|
ADHESIVES FOR PAPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS – TACK MEASUREMENT FOR PRESSURE-SENSITIVE ADHESIVES – DETERMINATION OF LOOP TACK
|
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES – PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
|
|
TEXTILES – TEAR PROPERTIES OF FABRICS – PART 2: DETERMINATION OF TEAR FORCE OF TROUSER-SHAPED TEST SPECIMENS (SINGLE TEAR METHOD)
|
|
TEXTILES – TENSILE PROPERTIES OF FABRICS – PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD
|
|
TEXTILES – TENSILE PROPERTIES OF FABRICS – PART 1: DETERMINATION OF MAXIMUM FORCE AND ELONGATION AT MAXIMUM FORCE USING THE STRIP METHOD
|
|
TISSUE PAPER AND TISSUE PRODUCTS – PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION
|
|
PACKAGING – SACKS MADE FROM THERMOPLASTIC FLEXIBLE FILM – TEAR PROPAGATION ON EDGE FOLDS
|
|
ADHESIVES – T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES
|
|
FINAT TEST METHOD NO. 22 INK ADHESION - ADVANCED
|
|
FINAT TEST METHOD NO. 9 ‘LOOP’ TACK MEASUREMENT
|
|
FINAT TEST METHOD NO. 3 LOW SPEED RELEASE FORCE
|
|
FINAT TEST METHOD NO.2 PEEL ADHESION (90º) AT 300mm PER MINUTE
|
|
FINAT TEST METHOD NO. 18 DYNAMIC SHEAR
|
|
FINAT TEST METHOD NO. 11 QUALITY OF SILICONE COATED SUBSTRATES FOR SELF-ADHESIVE LAMINATES: SUBSEQUENT ADHESION
|
|
FINAT TEST METHOD NO.1 PEEL ADHESION (180º) AT 300mm PER MINUTE
|
|
FINAT TEST METHOD NO.1 PEEL ADHESION (180º) AT 300mm PER MINUTE
|
|
TOUCH AND CLOSE FASTENERS – DETERMINATION OF PEEL STRENGTH
|
|
ADHESIVES – DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF RIGID-TO-RIGID BONDED ASSEMBLIES
|
|
TEXTILES – TEAR PROPERTIES OF FABRICS – PART 4: DETERMINATION OF TEAR FORCE OF TONGUE-SHAPED TEST SPECIMENS (DOUBLE TEAR TEST)
|
|
TEXTILES – TEST METHODS FOR NONWOVENS – PART 4: DETERMINATION OF TEAR RESISTANCE
|
|
TEXTILES – TEST METHODS FOR NONWOVENS – PART 3: DETERMINATION OF TENSILE STRENGTH AND ELONGATION
|
|
PLASTICS – FILM AND SHEETING – DETERMINATION OF THE COEFFICEINTS OF FRICTION
|
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS – DETERMINATION OF TEAR STRENGTH
|
|
RUBBER- OR PLASTICS-COATED FABRICS – DETERMINATION OF TEAR RESISTANCE – PART 1: CONSTANT RATE OF TEAR METHODS
|
|
ADHESIVES – DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF RIGID-TO-RIGID BONDED ASSEMBLIES
|
|
TEXTILES – YARNS FROM PACKAGES – DETERMINATION OF SINGLE-END BREAKING FORCE AND ELONGATION AT BREAK
|
|
RIGID CELLULAR PLASTICS – DETERMINATION OF TENSILE PROPERTIES
|
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS – DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
|
|
RUBBER OR PLASTIC COATED FABRICS – DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK
|
|
RIGID CELLULAR PLASTICS – DETERMINATION OF COMPRESSION PROPERTIES
|
|
RUBBER, VULCANIZED OR THERMOPLASTIC – DETERMINATION OF ADHESION TO A RIGID SUBSTRATE – 90º PEEL METHOD
|
|
PLASTICS – DETERMINATION OF COMPRESSIVE PROPERTIES
|
|
PLASTICS – DETERMINATION OF TENSILE PROPERTIES – PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
|
|
PLASTICS – DETERMINATION OF FLEXURAL PROPERTIES
|
|
RUBBER, VULCANIZED OR THERMOPLASTIC – DETERMINATION OF TENSILE STRESS - STRAIN PROPERTIES
|
|
RUBBER, VULCANIZED OR THERMOPLASTIC – DETERMINATION OF ADHESION TO TEXTILE FABRIC
|
|
RUBBER, VULCANIZED OR THERMOPLASTIC – DETERMINATION OF TEAR STRENGTH – PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES
|
|
RUBBER- OR PLASTICS-COATED FABRICS – DETERMINATION OF COATING ADHESION
|
|
PLASTICS – FILM AND SHEETING – DETERMINATION OF TEAR RESISTANCE – PART 1: TROUSER TEAR METHOD
|
|
PAPER AND BOARD – DETERMINATION OF TENSILE PROPERTIES – PART 2: CONSTANT RATE OF ELONGATION METHOD
|
|
Hier sehen Sie nur einige der über 100 neuen Funktionen,
die Instron® Bluehill für Series IX-Anwender bereithält
|
|
Hier sehen Sie nur einige der über 100 neuen Funktionen,
die Instron® Bluehill für Merlin-Anwender bereithält
|
|
Bei diesem „White Paper“ handelt es sich um eine vergleichende Analyse, in der die Vorzüge von Kraftaufnehmern gegenüber Druckaufnehmer erläutert werden.
|
|
This issue includes an article on California Department of Transportation and its East Span Seismic Safety Project, as well as a technical tip on Shore Scales. The Q&A is on how to make certain your extensometer is ready to use.
|
|
This application study tests an aramid cord using Instron®’s
standard pneumtaic cord and yarn grips and compares the results
to those obtained with Instron’s unique pneumatic aramid cord
and yard grips to determine which is more accurate and suitable.
|
|
This issue includes an article on Magnaflux Quasar, as well as information on Correction Compliance techniques. The Q&A is on getting better r-values when using a clip-on extensometer.
|
|
Instron and Huxley Bertram Engineering have partnered to redevelop a key piece of equipment in the pharmaceutical development laboratory.
|
|
2820-061 Internal Bond Fixture for Wood
|
|
Mit Bluehill 2 Materialprüfungs-Software steht die zweite Generation des ursprünglichen voll integrierten modularen Softwarenpakets zur Verfügung, das maßgeschneiderte Anwendungslösungen für den Labormanager und Prüfer von Heute bietet. Zusätzlich zu Standard-Prüfanwendungen wie Zug-, Biege-, Schälungs-, Reiß- und Reibungsversuche besitzt Bluehill 2 eine Reihe weiterer neuer und einzigartiger Funktionen
|
|
Komplettlösung für EN 10002-1 mit digitalem, automatischem Dehnungsaufnehmer
|
|
Statische Schwerlastprüfungen mit hydraulischem Spannzeug
|
|
Statische Prüfungen mit niedrigen Kräften und Schraubspannzeugen
|
|
Komplettlösung für dünne Folien
|
|
Technical article that explains the differences between a closed-loop hardness tester and a deadweight hardness tester; and provides a clear explanation of the advantages that closed-loop hardness testers hold over deadweight systems.
|
|
King portable Brinell hardness tester with 14 in. vertical capacity frame and 4 in. horizontal capacity. Test head and gage calibrated for test loads from 0-3000 kg. included.
|
|
Instron's non-contacting video extensometers' technology received US and European patents.
|
|
Wilson Instruments offers a line of semi- and fully-automatic systems for Knoop, Vickers and Rockwell hardness testing.
|
|
Komplettlösung für dünne Folien
|
|
Komplettlösung für Textilien
|
|
Statische Prüfungen mit niedrigen Kräften und pneumatischen, beidseitig wirkenden Spannzeugen
|
|
Komplettlösung für ISO 527-2 und ISO- 178
|
|
This issue includes an article on National Geographic, as well as information on grip attachment techniques. The Q&A is on the difference between Knoop and Vickers tests.
|
|
Komplettlösung für dünne Folien
|
|
Komplettlösung für statische Schwerlastprüfungen
|
|
Komplettlösung für Elastomere
|
|
Komplettlösung für EN 10002-1 mit berührungslos messendem,erweitertem Video-Dehnungsaufnehmer
|
|
The model 3345 plastic package is a complete, out-of-the-box mechanical testing instrument for tension and flex testing of plastic materials.
|
|
The partnership introduces a new testing system designed to measure and record radial stiffness and hoop strength of interventional medical devices.
|
|
This issue includes an article on CO2 storage, as well as information on balancing your load cell. The Q&A is on the different styles of extensometers.
|
|
High-temperature pneumatic action grips which provide
a convenient method for clamping delicate films,
polymers and woven fabric within a temperature controlled
environment.
|
|
Instron verpflichtet sich zu der Entwicklung und Einführung einer breiten Palette von Dienstleistungsprodukten, mit denen wir unseren Kunden und anderen Anwendern von Materialprüfsystemen umfassende Supportvereinbarungen anbieten können.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
This issue includes an article on testing the Titanic's rivets, as well as the benefits of the Preload feature in Bluehill. The Q&A is on entering dimensions for each specimen.
|
|
This issue includes an article on recycling plastics, as well as selecting jaw faces based on the hardness of your specimen. The Q&A is on the difference between load and stress.
|
|
This issue includes an article on lab-grown tissues, as well as information on how damaged tups can change your test results. The Q&A is on performing cyclic tests on a static testing machine.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
Nutzen Sie das volle Potential Ihrer Mitarbeiter und schöpfen Sie Ihre Investition in Instron® Systeme mit praxisnahen, interaktiven Schulungen noch besser aus.
|
|
SATEC Partner software is developed using professional standards described in this document. Software verification letter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Instron continues its partnership with McLaren Technology Centre by providing the Formula One team with state of the art vehicle testing equipment.
|
|
Honda and Instron announce team supplier agreement.
|
|
Instron, ein führender Hersteller von Prüfanlagen zur Untersuchung mechanischer Eigenschaften von Materialien und Komponenten, stellt ElectroPuls vor, ein innovatives, elektrodynamisches Prüfsystem für ein breites Spektrum biomedizinischer Prüfungen.
|
|
Impact testing of automotive components to establish energy absorption characteristics.
|
|
Instron, ein führender Hersteller von Prüfeinrichtungen zur Untersuchung der mechanischen Eigenschaften von Materialien und Bauteilen, präsentiert das multifunktionale Prüfsystem ETMT 8800, das in Zusammenarbeit mit dem englischen National Measurement Laboratory (NPL) entwickelt wurde. Instrons ETMT 8800 eignet sich ideal zur Prüfung von Metallen und anderen leitfähigen Materialien aus den Bereichen der Metallverarbeitung und Produktion von Neuent- wicklungen, wie z. B. aus der Raumfahrt.
|
|
Instron, ein führender Hersteller von Prüfanlagen zur Untersuchung mechanischer Eigenschaften von Materialien und Komponenten, erweitert seine Serie 5800 in Funktionalität, Leistung und Zuverlässigkeit, die in der Branche unübertroffen ist. Richtungsweisend für die anspruchsvolle Materialprüfung bietet die 5800-Serie höchste Flexibilität und Leistung. Ist das 5800-System mit 32-bit LabVIEW-Treibern konfiguriert, können komplexe Prüfsequenzen aufgebaut werden,
die weit über den Bereich von Standard-Softwarepaketen hinausgehen.
|
|
Instron, ein führender Hersteller von Prüfeinrichtungen zur Untersuchung der mechanischen Eigenschaften von Materialien und Bauteilen, veröffentlicht heute seinen neuen Zubehörkatalog für die Materialprüfung. Auf jetzt über 450 Seiten der 3. Ausgabe dieses beliebten Katalogs wird das breite Spektrum von Zubehörteilen zur Erweiterung von Materialprüfsystemen vorgestellt.
|
|
Instron's newest version of Bluehill Software is compatible with all 3300 Series systems.
|
|
Testing of Adhesives per ISO 11343 on Dynatup Impact System
|
|
The Instron® model XL (long travel) extensometer is a
precise device for measuring strain in highly extensible
materials such as elastomers, semi-rigid plastics and
films.
|
|
This document describes using Dynatup Impact system to test eye glass lenses or according to government impact resistence speficiations.
|
|
|
|
The model 3342 start package is a state-of-the-art mechanical testing instrument that includes and all components necessary to start testing right away.
|
|
The model 3382 metals testing packages are turnkey mechanical testing systems that allow
you to begin evaluating your product immediately.
|
|
The ETMT 8800 Electrothermal Mechanical Testing System is based on the Instron advanced 8800 digital controller and Microtester test frame. The system developed by Instron is with unrivalled
thermomechanical capabilities, available in an
affordable benchtop package.
|
|
This issue includes an article on stroke prevention testing, as well as a grip upgrade promotion. The Q&A is on variations of tensile testing speed.
|
|
Instron® Limited Terms & Conditions of Sale.
|
|
Instron - Division of ITW Ltd Terms and Conditions of Sale
|
|
Webinar will cover what to do with your Impulse Data after you have collected it. Topics covered will include using the data explorer; use of data analysis options & tools; creation of user calculations and Impulse Systems Options.
|
|
Instron Limited's UKAS ISO17025 Calibration Laboratory Certificate
|
|
Datenschutzerklärung
|
|
2820-008 Tension Grips - Perpendicular to Grain
Meets ASTM D 143
10 kN(1000 kgf, 2250 lbf) force capacity
Designed for 50 mm x 50 mm x 62 mm (2 in x 2 in x 2.5 in) specimens
|
|
|
|
Instron's compression-only testing system is used to test large springs on locomotives.
|
|
Catalog Number 2712-002
Rated capacity 250 N (25 kgf, 50 lbf)
|
|
Catalog number 2713-001
Rated capacity 1 kN (100 kgf, 225 lbf)
Ideal for testing elastomers, flexible plastics and thin films.
Temperature range: -20 °C to 150 °C (-4 °F to 300 °F)
|
|
Accessory e-newsletter containing articles on food testing and Jaw face offer.
|
|
Researchers at the University of Cambridge, UK, study the biomechanics of the carotid artery.
|
|
Westmoreland Mechanical Testing and Research, Ltd purchases 10 Instron servohydraulic test frames.
|
|
Accessories e-newsletter containing articles on non-contact extensometry and plastic strain.
|
|
Accessory e-newsletter containing articles on wood fixtures and part one of gripping solutions and care
|
|
Accessories e-newsletter containing articles on the Bio bath and part two of gripping solutions and care.
|
|
Accessory e-newsletter containing articles on Versa channel and part three gripping solutions and care.
|
|
|
|
Instron's customized 9000HLX Universal Testing System is designed to test materials for the San Francisco-Oakland Bay Bridge East Span Seismic Safety Project.
|
|
This issue includes articles on fracture devices and Honda Formula 1. The Q&A is on choosing the right extensometer when determining a yeild stress.
|
|
Instron hat das richtige Zubehör für Ihre für Ihre Anwendungen!
|
|
The Biopuls multi-axial spine testing system is a
powerful and flexible tool for investigating spine
kinematics. The system allows full simulation of
physiological spine motions and loads.
|
|
The manual wedge action grip is designed for easy
specimen loading, alignment and positioning. After
initial face to specimen contact, gripping force will
increase as the testing load increases. Virtually no
preload is seen during specimen clamping due to
Instron's design of moving grip bodies. This makes
them particularly suitable for testing high strength
materials, such as metals and composites, ensuring that
specimen slippage is eliminated.
|
|
Instron’s Model EXL (Extra Long Travel) Extensometer
is a precise device for measuring strain in highly
extensible materials such as elastomers, semi-rigid
plastics and films. Designed for use in ectromechanical
testing instuments the EXL can be used to measure the
specimen’s elongation up to 30 in or 750 mm.
|
|
Instron introduces ElectroPuls, designed for static and fatigue testing.
|
|
Safety Precautions Training for Operating your Instron Materials Testing Equipment
|
|
This special issue of TechNotes is focused on gripping tips, along with a 20% jaw face discount offer.
|
|
|
|
Instron bietet eine Überprüfung der folgenden Richtlinien und Berechnungen, wie sie in ASTM E 1012 dargelegt sind.
|
|
Das Instron-Kalibrierungslabor ist autorisiert, anhand der Zertifizierungen ISO 7500-1 und 7500-2 zur Überprüfung von Prüfgeräten zu arbeiten, die für die nicht-axiale Zeitdehnungsprüfung entsprechend der Norm ISO 204 eingesetzt werden.
|
|
Instron introduces a coil spring load center testing system designed specifically for the automotive industry.
|
|
Pamphlet of 20 pages that explains seven tips for tests of materials.
|
|
This issue includes articles on Skyline High School and high strain rate testing. The Q&A is on negative load value.
|
|
Dynatup offers the 8200 drop weight impact test machine
to meet the need for a small mass, drop weight impact
test machine with a range of adjustable energies and
velocities. The 8200 is ideal for low-energy
testing of thin section or brittle plastics, composites,
ceramics, films and metals. The machine's wide
range of test configurations allows for testing of both
specimens and actual components.
|
|
Proper calibration of your test system is the first step in ensuring that your lab is producing high quality data and valid results. Current issues related to calibration in materials testing labs include changes to national and international standards, accreditation to ISO 17025, and uncertainty of measurement. We will discuss recent changes to force, strain, and hardness standards, the release of a new ASTM standard for displacement calibration, and other potential new standards. Since not everyone is really sure what accreditation is all about, we will give an introductory review of why accreditation has value, who performs the accreditation, and how ILAC fits into the picture. ISO 17025 requires uncertainty of measurement analyses from testing laboratories. We will give an example of how the uncertainty of calibration can affect the total uncertainty of the test results.
|
|
Two-page brochure for Wilson Instruments Rockwell 2000 Series hardness testers. The Rockwell 2000 features a unique, electronic closed-loop control system for superior accuracy and repeatability. Available in 3 sizes and in regular, superficial and twin scales.
|
|
Impact testing application note for pharmaceutical tablets.
|
|
This issue includes articles on spine testing and Nanocomposites, Inc. The Q&A is on elastic modulus values.
|
|
This issue includes articles on Instron's deadweight stack and Tissue Regeneration, Inc. The Q&A is on hardness test blocks.
|
|
Short, descriptive flyer of Wilson Instruments' ATA computerized autotesting systems - software-based measurement packages
designed to increase productivity, accuracy and efficiency
through automating the measurement and/or the stage
navigation process.
|
|
|
|
Catalog Numbers 2711-002, 2711-003, 2711-004, 2711-007
Rated capacity 0.75 N (0.075 kgf, 0.165 lbf)
Small single polymer fibers
|
|
Catalog number 2712-012
Rated capacity 10 kN (1,000 kgf, 2,250 lbf)
Specimens from delicate films to polymers and woven fabrics.
|
|
Die Materialprüfmaschinen der 5500 Serie bieten Hochleistungs-Prüfrahmen, DSP Elektronik mit hoher Bandbreite, sowie die modular aufgebaute Prüfsoftware Bluehill 2
|
|
performing in-plane compressive properties of polymer matrix composite material reinforced by high modulus fibers, procedure A and B.
IITRI design for method B - Celanese design for method A
Catalog Number 2505-001/ 002/ 020
|
|
Performs compressive strength tests, generally on quasi-isotropic composite material, as well as multidirectional polymer matrix composite laminates reinforced with high modulus fibers.
Catalog Number 2505-027
|
|
The recently issued ASTM standard, F2516-05: Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials, suggests that strain measurement for nitinol specimens can be determined by machine crosshead motion, a clip-on extensometer or a video extensometer. The purpose of this study was to compare the three different methods for testing nitinol tubing. Stress-strain results reveal that the video extensometer and the clip-on extensometer provide for comparable results. However, the non-contacting video extensometer may eliminate slipping and premature failure that are common sources of error with the clip-on extensometer.
|
|
Items to consider when changing from steel to carbide balls when complying with the new ASTM E 18 standard.
|
|
Tables define the difference in Rockwell hardness levels, when changing from steel to carbide balls. Data is given for several different Rockwell ball scales.
|
|
Catalog Numbers 2620-613/614/615/619/620/621
Available in gauge lengths of 12.5 mm, 25 mm or 50 mm (0.5 in, 1 in, 2 in)
|
|
Catalog Numbers 2640-007/ 008/ 001/ 003
pod_2640-007-008-001-003_rev3_0704
|
|
The flexure fixture allows a variety of flexural tests to be
performed, including determination of flexural modulus,
flexural strength and flexural yield strength.
Easy-to-install, the three-point fixture can be modified
with an optional conversion kit to provide a four-point
bending conversion
|
|
Instron®’s policy is to conduct business in a responsible manner within the guidelines set out by the US, UK and German export control regulations and laws...
|
|
Diese 24-seitige Broschüre von Instron stellt Dynatup Schlagprüfungs-Lösungen für Komponenten in den verschiedensten Branchen und Anwendungen vor.
|
|
“A picture is worth a thousand words…a video is the final word!”
Bluehill 2 Video Capture Module allows you to record and replay the actual test event associated a test curve in order to examine specific regions and points of interest, e.g. modulus, yield, peak and break, for materials and components that produce distinct test curves.
|
|
As the world's leading supplier of material testing systems, Instron offers a wide range of texture testing solutions for the food industry
|
|
Accurate and repeatable results are the goal for any good testing program. Unique characteristics of springs, most notably coil compression springs, can cause errors that make this goal difficult to achieve. You will learn about factors such as extraneous forces, frame deflection and others that cause errors, as well as how to minimize their affects on your load testing results.
In addition, you will learn about some advanced analysis techniques some of our customers are using to differentiate their products in the market. These techniques are made possible by analyzing the entire spring characteristic curve (load vs. height) to determine multi-rate spring transition points (knees), spring non-linearity and others.
|
|
Webinar on "Why Your Results Don't Look Right -Hidden Errors in Your Data" presented by Christopher Scott on April 5, 2006.
|
|
Das Web-Support-Agreement (WSA) versetzt Sie in die Lage, besser, schneller, billiger und sicherer zu arbeiten.
|
|
Eine preiswerte Lösung zum „Strecken“ Ihres Prüfbudgets
|
|
This document describes a 3300 Series instrument with Touchpanl controller and accessories for Quality Control applications.
|
|
|
|
The Instron Force Standards Laboratory offers calibration services that allow you to comply with ISO376 and ASTM E 74 requirements for calibration of secondary standards and working standards.
|
|
A 2-page flyer illustrating Impact testing solutions for standards and components in the plastics and film industry.
|
|
Simulates knee joint loading and motion.
|
|
|
|
T-slot tables provide an extended work area
primarily intended for clamping components or
structures for performing tensile, compression or
flexural tests.
The T-slot table is mounted directly on to the base
platen of the machine, and components/ structures can then be secured in position on the table using the various clamping tools supplied.
|
|
T-slot tables provide an extended work area
primarily intended for clamping components or
structures for performing tensile, compression or
flexural tests.
The T-slot table is mounted directly on to the base
platen of the machine, and components / structures can then be secured in position on the table using the various clamping tools supplied.
|
|
Ultra High Precision Testing Systems. Mechanical Testing for Microelectronics R&D, production and other varieties of high accuracy, small scale testing.
|
|
Two-page overview of Wilson Instruments Hardness products; such as Rockwell hardness testers, Knoop and Vickers testers, portable testers, accessories and calibration.
|
|
Instron Dynatup releases its Impact Applications Brochure, which focuses on component-level testing.
|
|
Instron offers the Model EXL Extensometer, designed for extra long travel.
|
|
Instron now offers a subscriber-only e-newsletter, covering topics on a wide range of accessories for materials testing.
|
|
Catalog number 2713-006
Rated capacity 100 N (10 kgf, 22 lbf)
Ideal for natural rubber latex, elastomers, paper and polymer films
|
|
Accessories e-newsletter containg articles on screw action grips and compliance.
|
|
|
|
User manual for Wilson Instruments Rockwell models TT & TY new style. New style TT & TY hardness testers are characterized by minor load setting at front of tester near indenter.
|
|
|
|
Simple application note about the In-Spec in use with a stereo microscope, for observing the sample during testing.
|
|
Cyclic tests were run on conveyor belt material in accordance
with ISO 9856.
|
|
The purpose of this test was to determine a method for
measuring the bond strength of solder ball contacts to IC
packages. Tension tests were performed on two types of
packages, one with 508 contacts and the other with 52
contacts.
|
|
The purpose of this test was to accurately measure the force
required to break a crimp joint between a 32 mm long metal
pin and the surrounding metal body in compression.
|
|
The purpose of these tests was to measure the modulus of
rupture (maximum stress) and the flexural modulus of two
types of small graphite/epoxy specimens using a four-point
flex fixture.
|
|
Tensile, buckle and recovery tests were run on Avistrap PW100
cord stapping. Two 1¼ inch wide samples were tested for
tensile and buckle tensile properties. One sample was tested
for recovery properties.
|
|
The purpose of the test was to demonstrate the Instron 5542
for testing small disks in compression. Tests were run on wet
and dry disks using both the crosshead and Linear Variable
Differential Transducer (LVDT) for measuring displacement.
|
|
A tack test is a common method for evaluating the
adhesiveness of a material and to compare adhesiveness
between materials.
|
|
The purpose of this test was to determine the force required
to break a pressed connection between four tubes and an
aluminum part.
|
|
Compression test of keypads using a model 5569 series was
performed to simulate loads required in typing.
|
|
Cyclic compression tests were performed on small circular
springs and circular gland seals using the TestProfiler
software.
|
|
User manual for Wilson Instruments Rockwell hardness testers models JR & JS.
|
|
User manual for Wilson Instruments Rockwell models OUR and OUS hardness testers.
|
|
User Manual Wilson Instruments Rockwell models TT & TY hardness testers (old style). Old style characterized by minor load housing at the top rear of the tester.
|
|
User manual Wilson Instruments Model Tukon 300 user manual.
|
|
One page flyer featuring Instron Dynatup 9250 impact test instrument configured for plastic conduit and pipe testing per UL 651 and ASTM D2444
|
|
Miniature 90° Peel Fixture
Cat. no. 2820-034
|
|
Steel welded wire fabric, made from either cold-worked deformed wire or a combination of deformed and non-deformed wires, is often used in concrete reinforcement. In addition to the tensile strength and bend strength of the welds that support the fabric, the shear strength of the longitudinal and transverse wires is also important to characterize.
|
|
The manufacturer of a cleaning solution that is packaged and delivered for use in the food industry has received customer complaints that the solution is leaking at some point during shipment. It is possible that the adhesive or the process used to seal the package is insufficient for preventing leakage of the solution over time. A comparison of the strength of the packaging material compared to the strength of the seal through a series of
peel tests may provide insight into the problem.
|
|
The Advanced Video Extensometer (AVE) has the ability to measure axial and transverse strain without contacting the specimen. Such non-contacting strain measurement is advantageous for testing thin and delicate specimens. The purpose of this test was to evaluate the AVE as a tool for calculating Poisson's Ratio in strips of polymer membranes in accorance with ASTM D 882.
|
|
A manufacturer of conveyer belt material was experiencing problems when trying to test their product in tension. The conveyer belt samples either slipped out of the jaw faces due to the inherent lubricity of the material or the test resulted with a jaw break. Samples were sent in to determine if there was a configuration available to resolve this issue.
|
|
Sheet metal tensile testing applications require the use of an extensometer to comply with relevant ASTM and ISO testing standards accuracy requirements. In some cases, the thickness of the specimens may be too thin for use with a traditional clip-on extensometer. Developments in the technology of extensometry offer metals testing customers other options, such as the Instron® Advanced Video Extensometer (AVE) for testing aluminum specimens in tension.
|
|
A manufacturer of consumer breath freshening strips uses the In-SpecTM 2200 electromechanical system to determine the tensile strength and elongation ofvtheir products. These results provide quality assurance in manufacturing and production, ensuring customer satisfaction.
|
|
Sheet metal testing applications require calculations such as yield strength, yield point elongation, ultimate tensile strength, plastic strain ratio ('r' value)and the strain hardening exponent ('n' value). These calculations place a high physical demand on traditional contacting extensometers. The purpose of this testing was to evaluate the Advanced Video Extensometer (AVE) for performing non-contacting strain measurement on steel specimens.
|
|
A manufacturer of ammunition pellets used in a variety of firearms uses an Instron® electromechanical test system to evaluate the compressive strength of the pellets and the type of deformation they exhibit under load. Further, the shelf life of these pellets must also be quantified in order to guarantee performance over time.
|
|
Characterization of the mechanical properties of materials used in space flight is at the forefront of research and development activities for NASA. One such test required the calculation of Poisson's Ratio, a measure of a material's compressibility, on foam material used in the construction of space shuttles in accordance with ASTM D 1623, "Standard test method for tensile and
tensile adhesion properties of rigid cellular materials".
|
|
Evaluation of a pillow's comfort or firmness has historically relied on surveys completed by employees or customers' feedback. In an attempt to quantify these measures of comfort, one pillow manufacturer delivered several pillow specimens to Instron® to explore testing configurations that could produce repeatable data to correlate with that generated from the customer and
employee surveys.
|
|
A manufacturer of composite materials uses an Instron® electromechanical testing system and 3-point bend fixture to determine the flexural modulus, flexural strength and flexural strain of their composite bars. The test was conducted according to the ASTM D 790, "Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical
Insulating Materials".
|
|
There are two common challenges in conducting high-speed, low-force
testing. The first challenge is overcoming the inertial force resulting from acceleration of the upper grip and the crosshead. The second challenge is to reduce the amplitude of the resonant frequency resulting from the combination of a high rate of crosshead extension and the grips and load cell used. The purpose of this testing was to isolate these issues and provide a solution for minimizing their effects.
|
|
A manufacturer of copy paper needs to investigate the cause of copy machine failure as a result of frequent paper jams. A Coefficient of Friction (COF) test was recommended to measure the static and kinetic coefficients of friction between two sheets of paper. Because no specific testing standard outlines a method for this type of material, ASTM D 1894 "Standard Test Method for Static and Kinetic Coefficient of Friction of Plastic Film and Sheeting" was followed.
|
|
Four different fabric samples were tested using a ball burst fixture in accordance with ASTM D 6797 to measure the burst strength of each and compare values between samples. The test was used to investigate the effect of different chemical treatments on the mechanical properties of the fabric.
|
|
Tensile testing of thin plastic sheeting in accordance with ASTM D 882 is a common testing requirement for many Instron customers. Gripping of these delicate specimens is the prevalent challenge in most tests. The gripping technique must prevent slipping of the material at high loads but not tear into the material and cause premature specimen failure.
|
|
A manufacturer of coated fabrics is interested in evaluating the effect of a particular coating on the flexural properties of fabric material. Four different coated fabric samples were delivered to the Instron® demonstration laboratory for evaluation.All testing was conducted in accordance with ASTM D 790.
|
|
Tensile testing on textile fabrics used in the automotive industry using a grab test in accordance with ASTM D 5034.
|
|
Recent studies have shown a relationship between mechanical testing of food, called Texture Profile Analysis (TPA), and the texture of food. TPA was performed to differentiate between three varieties of tofu.
|
|
Instron offers its exclusive Web Support Agreement (WSA) to customers in Europe and Asia.
|
|
Instron offers an improved line for wood and adhesive testing.
|
|
Instron's multi-axial spine testing system used by the University of Minnesota to achieve 6-degrees of freedom.
|
|
Webinar on Impact Test Machine Parameters presented by Stephanie Williams on November 30, 2005.
Webinar covered potential common configuration errors that could cause errors in your data.
|
|
Webinar on VersaChannel was presented by Bruce Boswell on January 11, 2006.
This webinar describes the hardware and software components that make up the VersaChannel option. Learn how to install and connect typical extra channels to the system. We discuss software configurations, specific channel settings, and the calibration of different configurations. We demonstrate using the extra channels in Bluehill live displays, calculations, and graphs.
|
|
Webinar on Tips and Techniques on using the Video Extensometer presented by Sean McNeill and Richard McManuis on February 7, 2004.
|
|
Webinar on Portable Testing presented by Lorenzo Majno on May 26, 2005
The In-Spec Series of Portable Testers is designed to allow users to take the tester with them, to test things outside the lab, and to make field measurements. Applications include medical devices, agriculture, food, and light duty quality control testing.
|
|
Webinar on Hidden Errors in Your Data presented by John Reskusich and Larry Frost on June 26, 2003.
|
|
Webinar on "Why Your Results Don't Look Right - Hidden Errors in Y our Data" presented by Christopher Scott on October 19, 2005.
|
|
Webinar on Bluehill Software presented by Jim Ritchey and Frank Lio on July 15, 2004, October 27, 2004 and December 8, 2004.
|
|
Webinar on Advances in Video Extensometry(AVE) presented by John Reskusich and Bruce Boswell on January 26, 2005.
This webinar provides an overview to the new technologies applied to the most recent Instron video extensometer - the AVE (Advanced Video Extensometer).
|
|
Overview of webinar conducted that provides in-depth description and explanation of the change to ASTM E 18 regarding the use of carbide balls for hardness testing.
|
|
As the world's leading manufacturer of materials testing equipment, Instron is the premium choice when it's time to upgrade. Our Extend packages have been added to over 5000 systems worldwide.
|
|
|
|
Dynatup Impulse V3.0 release flyer with features and screen shots.
|
|
This data sheet describes the Serial Port Option for the TouchPanel controller. The serial port option allows test results to be transferred directly to an SPC computer.
|
|
Recent studies have shown a relationship between mechanical testing of food, called texture profile analysis (TPA), and the texture of food. A compression method and indentation method were used to differentiate between three varieties of tofu.
|
|
Texture testing for a variety of foods, using application specific fixtures such as the Kramer Shear Cell and the Back Extrusion Cell.
|
|
Test solutions for large-scale structures, materials and components used in construction. Encompassing a broad range of complete testing solutions, including configured machines and component based rig systems.
|
|
Guideline for the installation of a hydraulic ringmain, including information on pipes, valves, connections, and shutoffs.
|
|
Stossdämpfer-Prüfmaschine Typ MSP.
System zum Prüfen und Bewerten von Werkstoffverhalten und
charakteristischen Kennwerten von unterschiedlichsten Stoßdämpfertypen (z.B. Einrohr-/ Zweirohr-Dämpfern, Sitz-, Lenkungs- und Pralldämpfern etc.)
|
|
Shock Absorber Test Machines Type MSP for Damper Testing.
They are conceived to analyse and assess accurately and reliably the material properties and characteristic of all kind of damper types (e.g. single/ twin-tube shock absorbers, seat and steering dampers, metallic impactors etc.)
|
|
Shore® Instruments offers a unique system of o-ring fixtures designed with interchangeable inserts.
|
|
Comprehensive 40-page brochure encompasses the full range of Hardness testers from Wilson Instruments. Includes Rockwell, Knoop/Vickers, Brinell, and automated systems.
|
|
2820-060 Shear Test Fixture for Wood
|
|
This notice only relates to “Shoulder End Holder” Inserts that were purchased prior to May 2004 and that have been used repeatedly at testing forces above 30,000 lbs (133 kN).
The insert is rated for 60,000 lbs (267 kN). Instron has determined that a fatigue failure of the insert may result from repeated test’s at forces above approximately 50% of the insert’s rated capacity. Use below 50% of capacity is not expected to lead to failure.
A design change was made to the thread of this insert in April 2004 that has addressed this issue.
|
|
Cat. number 2710-200
|
|
Instron presents award for a novel interface system for prosthetic limbs to the University of Surrey, UK.
|
|
Instron introduces its new 5500 Series Accessories designed for the biomedical testing industry.
|
|
Advanced test systems to be deployed for testing spine implant devices.
|
|
Technical publication describing the basic fundamentals of Rockwell Hardness testing.
|
|
Catalog number 2741-081, 2741-082, 2741-083, 2741-084
|
|
2742 Series (2742-301)
|
|
2742 Series (2742-504)
|
|
Catalog Number 3118-304/3118-313
|
|
Catalog Number 2736-015
|
|
Catalog Number 2732-101
|
|
Catalog Number 2718-624
|
|
Catalog Number 2712-212/213/214
|
|
Catalog Number 2742-404
|
|
Catalog Number 2732-212/2732-213/2732-214
|
|
Catalog Number 2718-628
|
|
Catalog Number 2718-621
|
|
Catalog Number 2712-111
|
|
Describes the test process used to ensure that Bluehill calculations are valid.
|
|
Bluehill 2 software is developed using professional standards that are included in this document.
|
|
This brochure describes the Instron TouchPanel controller for use with 2300 & 3300 Series instruments.
|
|
Catalog numbers 3119-405 thru 3119-410 and 3119-Custom
|
|
Shore Instruments offers the S1 Digital Durometer, ideally suited for hardness testing of rubber and plastic.
|
|
2741 Series Mechanical Buttonhead Grips
Catalog Number 2741-081, 2741-082, 2741-083, 2741-084
|
|
+800 °C Reverse Stress Pullrods
Catalog number 3117-050
|
|
2742 Series ±250 kN (56 kip) Fatigue-Rated Hydraulic Modular Grips Catalog number 2742-504
|
|
Series 2742 ±30 kN (6.8 kip) Fatigue-Rated Hydraulic Wedge Grips Catalog number 2742-301
|
|
±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips catalog number 8260C
|
|
+600 °C and +1000 °C Tension Only Pullrods
Catalog numbers 3117-020, 3117-021
|
|
2860 Series Stud Pull Fixture
catalog number 2860-300
|
|
2860 Series PCB Clamping Stage
catalog number 2860-200
|
|
2860 Series X-Y and Theta-X-Y Manual Translation Stage
catalog number 2860-100
|
|
90° Angle Peel Fixture
catalog number 2820-035
|
|
2743 Series ±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips
Catalog number 2743-100
|
|
+600 °C (+1112 °F) Reverse Stress Pullrods
Catalog number 3117-030
|
|
Catalog number 3117-022
|
|
Catalog Number 2860-001
|
|
|
|
2718 Series Pneumatic Hydraulic Power Pack
Catalog number 2718-420
|
|
Pneumatic action grips allows rapid, easy loading of
specimens from delicate films to polymers and woven
fabrics. This provides a very simple and efficient
method for holding test specimens easily and quickly.
|
|
Pneumatic action grips allows rapid, easy loading of
specimens from delicate films to polymers and woven
fabrics. This provides a very simple and efficient
method for holding test specimens easily and quickly.
|
|
2718-600 Series Hydraulic Grips
Catalog number 2718-622
|
|
2850 Series T-Slot Tables
Cat. no. 2850-033
|
|
Catalog Number 2820-026. Precisely measures adhesive strength of tapes, laminated release coatings, paper and plastic films. Maintains constant 90° peel angle for accurate measurements.
|
|
|
|
Application Report highlights features of 1500 KN Static Hydraulic Test Machine for rebar testing.
|
|
Instron EXTRA ist eine flexible Serviceoption, die Ihnen einen Rundum-Service für Ihre gesamte Prüftechnik bietet. Ihr Materialprüfsystem muss immer die optimale Leistung bringen. Dies gilt gleichermaßen für neue, modernisierte und Instron-fremde Systeme. Instron Extra wurde entwickelt, damit Sie das Potential Ihrer Prüfsysteme voll ausschöpfen können
|
|
Displacement calibration services
|
|
Speed calibration services
|
|
Force calibration services for materials testing instruments
|
|
Catalog number 2810-200
Rated capacity 250 kN (25000 kgf, 56250 lbf)
3-point flexure fixture with an optional conversion kit for 4-point loading
|
|
Catalog number 2810-181
|
|
Software und Elektronik für Schlagversuche
|
|
Die Fallwerke der Dynatup 9200 Serie bieten neueste Technologie wie Hochleistungsrahmen, DSP Elektronik mit sehr hoher Bandbreite, selbstidentifizierende Kraftaufnehmer, Steuerungs- und Datenerfassungssoftware IMPULSE.
|
|
This document describes the features, benefits and specifications of the S1 Durometer
|
|
The Ottawa texture cell is used primarily for
determining texture properties of fruits and vegetables.
The upper part or plunger of the Ottawa cell is
attached to the load cell. The lower part consists of
an extrusion box with interchangeable inserts.
Catalog Number: 2830-040
|
|
The Kramer shear cell is a multi-bladed fixture
designed to produce shear stresses in a specimen that
relates to firmness. The Kramer cell is used mostly for
fruits and vegetables but can also be used to evaluate
meat cubes and nuggets.
Catalog Number 2830-018
|
|
Catalog Numbers 2810-097*/ 130/ 191
Two capacities: 10 kN (1,000 kgf, 2,250 lbf) and 100 kN (10,000 kgf, 22,500 lbf)
Meets the ASTM D 3574 and ASTM D 5672 standards*
Meets the EN ISO 2439:2000 standard
|
|
The Warner-Bratzler shear fixture includes a 1 mm
(0.04 in) thick nickel plated steel blade with a
vee-shaped notch. The 60° angle notch has a
0.5 mm (0.20 in) radius at the cutting edges.
The blade is precision ground flat to reduce friction
as it passes through the blade guides.
|
|
Catalog number 2830-011 is designed for determining
bread firmness. This 10 cm2 (1.5 in2) aluminum anvil
meets the requirements specified by the American
Association of Cereal Chemists.
Catalog number 2830-009 is a stainless steel anvil
designed for general deformation and fracture testing.
|
|
Catalog number 2830-008 is a set of four stainless steel
plates for use with puncture probes or compression
anvils. The set consists of one flat plate and three
plates with various shaped holes. The holes are useful
when performing tests on round shapes like fruits that
tend to roll on a flat surface. The holes also assists in
centering the specimen relative to a puncture probe or
compression anvil. These plates are designed to be
used with the support frame and drip tray.
|
|
Flat-end puncture probes produce a shear stress in the
specimen. The force required to cause shearing as the
probe penetrates the specimen relates to texture
properties such as firmness and hardness.
Catalog Number: 2830-006, 2830-036, 2830-005, 2830-015
|
|
The back extrusion cell consists of a plunger that
connects to the load cell and a cylindrical cup that
holds the test specimen. The cup is mounted in a drip
tray that contains any specimen overflow that may
occur during the testing. The drip tray mounting plate
has four pins that accurately locate the cup
concentrically to the plunger. This design simplifies
removal of the cup for cleaning and ensures a
consistent 4 mm (0.16 in) gap around the plunger.
|
|
Catalog Number 2820-020 and S1-11237. Precisely measures the relative peel resistance
of high strength adhesive bonds between a rigid adherend and a flexible adherend.
|
|
Waiting on desc.
|
|
Waiting on desc.
|
|
The 2820-019 climbing drum peel test fixture is designed to measure the bond strength of
adhesive bonds in honeycomb materials with rigid backing.
|
|
The 2820-015 climbing drum peel test fixture is designed to measure the bond strength of
adhesive bonds in honeycomb materials with flexible backing.
|
|
Catalog number 2810-250
Rated capacity 500 kN (50000 kgf, 112500 lbf)
3-point flexure fixture with an optional conversion kit for 4-point loading
|
|
2810 Series Flexure Fixture
Catalog number 2810-206
|
|
2850 Series T-slot tables
catalog no. 2850-201.
|
|
The AsphaltPro Direct Tension Test System (DTT) is a complete solution for determining the failure properties of asphalt binder at low temperatures to meet the current Superpave Performance-Graded Binder Specification (AASHTO M320).
|
|
Fragen, die Sie stellen sollten, wenn Sie einen Kalibrierungsanbieter benötigen
|
|
Instron® offers a fully integrated indirect tensile testing
system which is designed for determining the creep
compliance and tensile strength of hot mix asphalt
(HMA) in accordance with AASHTO specification T 322.
Tensile creep and tensile strength are required in
SUPERPAVE levels 2 and 3 designs to determine the
master relaxation modulus curve and fracture
parameters. This information is used to calculate the
fatigue performance and thermal cracking of HMA.
|
|
Instron®'s latest addition to its family of asphalt test
systems is the new toughness and tenacity asphalt
tester. We have leveraged our expertise in direct
tension testing to provide a system designed
specifically for measuring the toughness and tenacity
of bituminous materials.
|
|
|
|
|
|
|
|
|
|
|
|
Wilson Instruments introduces its 400 Series of Knoop/Vickers Testers ideal for metals, ceramics and other non-metallic materials.
|
|
|
|
Instron offers its Web Support Agreement (WSA) for Bluehill 2 software users. WSA members can now access their custom Web site directly from Bluehill 2 software.
|
|
Instron introduces a new Hydraulic Testing System with Single-Side Acting Hydraulic Grips - allows for accurate and reliable testing.
|
|
Instron releases its 2nd edition Accessories Catalog. This popular 480 page catalog details a broad range of accessories to enhance materials testing systems.
|
|
Piston-compressed air and oil dampers are used in many applications, such as on automobile doors and in engines. The testing challenge in this application is overcoming the inertia created by the test frame crosshead as it is compressed to the hold points.
|
|
This report summarizes the test configuration recommended for evaluating the forces required to eject fluid from a syringe. It is important that the material and design of both the syringe and the needle be tested, as both will have an effect on the overall forces required of the end-user. The challenge in testing these tubular specimens is to create a platform in which the syringe can be placed and remain stable while a compressive force is administered on the plunger from above to mimic normal use of the device.
|
|
Strain calibrations give you a statement of how well your system is performing, particularly when you use extensometry to determine strain measurements.
|
|
Kevlar and Spectra are high strength, polymeric fibers, with diverse applications. When testing both Spectra and Kevlar, precise measurement of ultimate elongation, maximum load, and ultimate strain are imperative in determining the mechanical properties. This report summarizes the test configuration used for such an application.
|
|
The strength of adhesive bonds depends greatly upon the conditions under which the bonding process is carried out and the testing for which is described in ASTM D 1002, Lap Shear Strength of Adhesively Bonded Metal Specimens. This report demonstrates the capabilities of the Instron test frame and software for testing in accorandance to this standard.
|
|
|
|
Upgrade Systems
Extend Instron 4500 Series Universal Testing Systems
pod_Extend4500_rev3_0705
|
|
Upgrade Systems
Extend Instron 1120 Series Universal Testing Systems
pod_EXTEND1120_REV3_0705
|
|
Statement on the Environmental Impact of Instron Electromechanical Testing Machines.
Instron electromechanical machines are designed to produce no adverse environmental impact during normal use as long as they are operated and serviced in accordance with their operating instructions.
|
|
Describes the test process used to ensure that Bluehill calculations are valid.
|
|
Series IX (Version 7.XX and 8.XX) software is developed using professional standards described in this document. Software verification letter.
|
|
Dynatup Impulse software is developed using professional standards described in this document. Software verification letter.
|
|
FastTrack 8800 bietet ein Maß an Schutz und
Datenintegrität, wie es kein anderes
servohydraulisches Prüfsystem erreicht.
|
|
|
|
Catalog Number: 2850-003. The single axis specimen measuring unit can be used
in both manual and automated Instron testing systems. The unit includes probes tips, stand, foot-switch, RS-232 interface, and connecting cables.
|
|
2820-010 Compression Fixture - Perpendicular to Grain
25 kN(2500 kgf, 5625 lbf) force capacity
Designed for 50 mm x 50 mm x 150 mm (2 in x 2 in x 6 in) specimens
Meets BS 373 and ASTM D 143
|
|
2820-004 Hardness Test Fixture
Meets BS 373, ASTM D 143 and ASTM D 1037
100 kN (10,000 kgf, 22,500 lbf) force capacity
Designed for 50 mm x 50 mm x 150 mm (2 in x 2 in x 6 in) specimen sizes
pod_2820_004a_0203
|
|
Bluehill software is developed using professional standards that are included in this document.
|
|
ARTEL (Advanced Rig for Testing Exhaust Lines) ist ein System zur Prüfung der Betriebsfestigkeit kompletter Abgasanlagen unter thermischer und mechanischer Wechselbeanspruchung. - POD: IST0033 AE
|
|
Instron were proud to sponsor the Symposium on Structural Durability in Darmstadt, Germany and present the Instron Award 2005 to Martin Küppers from the Fraunhofer Institute for Structural Durability LBF in Darmstadt.
|
|
The new Wilson Instruments Multi- Mount Clamping fixture is designed to support and clamp multiple mounted samples, and other typical Microindentation materials.
|
|
The North American Instron Calibration Lab is now ISO 17025 accredited (NVLAP Lab Code 200301-0) for on-site calibration of Speed, Displacement, Stroke, and Temperature.
|
|
Catalog Number 2820-012. This specially designed fixture allows accurate 3-point
static bend testing to be performed on timber.
|
|
Die Prüfmaschinenserie 3300 wurde für die Anforderungen standardisierter und routinemäßiger Prüfungen entwickelt. Diese Serie stellt dem Benutzer Instron-Qualität zu einem sehr günstigen Preis zur Verfügung.
|
|
|
|
2820-011 Tension Grips for Chipboard, Fibreboard etc - Perpendicular to Surface. The tensile strength of chipboard, fibreboard, hardboard etc. perpendicular to the surface requires
the use of these specially designed grips.
|
|
Describes the ability of the In-Spec 2200 Mechanical Tester to perform tensile tests on plastic joints and medical tubing. The In-Spec is ideal for quality assurance testing and applications where bringing the tester to the specimen is advantageous.
|
|
2820-003 Cleavage Fixture for MONNIN specimens
Meets BS 373 and ASTM D 143
10 kN(1000 kgf, 2250 lbf) force capacity
Designed for 50 mm (2 in) x 76 mm (3 in) specimen cleavage area
|
|
2820-002 Shear Fixture - Parallel to Grain - guillotine type frame
Meets BS 373 and ASTM D 905
100 kN (10,000 kgf, 22,500 lbf) force capacity
Ideal for evaluating adhesive shear properties in bonded wood
|
|
Rated capacity 100 kN (10,000 kgf, 22,500 lbf)
Temperature range: -73 °C to 315 °C (-100 °F to 600 °F)
|
|
Catalog Number 2810-182
3-point flexure fixture with an optional conversion kit for 4-point loading
Rated capacity 100 kN (10,000 kgf, 22,500 lbf)
|
|
IST´s Hydropuls Crash Simulations Anlage arbeitet in einem nicht-zerstörenden Verfahren. Das System ist modular aufgebaut und gestattet so eine spätere Integration aller zur Zeit optional verfügbarer Applikationen wie z.B. Pitching, Seitencrash-Simulation, Mehrschlittenbetrieb etc.
|
|
RS MePar ist ein Softwaremodul aus der RS LabSite Software Suite zur Ermittlung von Kennwerten von Bauteilen mit viscoelastischen Eigenschaften.
|
|
These high force digital control servomechanical testing systems are a result of Instron’s continual effort to provide the best in high capacity universal testing frames.
|
|
Wir bei Instron sind Experten für die Modernisierung von systemen. Im Rahmen unserer EXTEND-Pakete können wir nicht nur Instron-Prüfrahmen, sondern auch Prüfrahmen anderer Hersteller mit neuester digitaler Elektronik und Anwendungssoftware aufrüsten.
|
|
Rated capacity 100 kN (10,000 kgf, 22,500 lbf)
Temperature range: -73 °C to 315 °C (-100 °F to 600 °F)
|
|
Catalog number 2732-006
Rated capacity 100 N (10 kgf, 20 lbf)
Temperature range: -70 °C to 315 °C (-100 °F to 600 °F)
|
|
Catalog number 2732-004
Rated capacity 1 kN (100 kgf, 225 lbf)
Temperature range: -70 °C to 315 °C (-100 °F to 600 °F)
|
|
European Calibration Laboratory now includes Charpy Impact to EN 10045-2 and ASTM E 23
|
|
Instron Offers Model 3382 100 kn Metals Testing Packages For High Capacity Testing At An Affordable Price
|
|
Instron Offers A New Package With "Touchpanel" Controller For QC Testing
|
|
Instron Offers Its Dynatup 8100 Series For High Energy Impact Testing
|
|
Instron Offers Affordable 3300 Series Starter Packages For Tensile and Compression Testing
|
|
Instron Introduces New Metals Testing Brochure
|
|
Instron introduces a new controller for its 3300 series electromechanical instruments
|
|
Instron Introduces Biopuls Multi-Station Spinal Disc Wear Debris Testing System - Tests up to six Intervertebral Disc devices simultaneously
|
|
Wilson Instruments Unveils New Web Site - Completely redesigned, new site is more user-friendly and informative
|
|
Instron Announces Its New Exclusive Web Support Agreement - 24/7 access to your laboratory’s support requirements
|
|
Instron announces the grand opening of its state-of-the-art worldwide headquarters in Norwood, Massachusetts
|
|
Instron introduces Bluehill 2 software, bringing intuitive operation and unmatched functionality to materials testing applications.
|
|
Features, control, interface, measuring, monitoring, data integrity, optional features, hardware options
|
|
Bringing a dynamic dimension to force measurement
|
|
The new Instron® 8870 series of servohydraulic testing systems are ideal for fatigue and static testing of biomedical, advanced materials and manufactured components. These tabletop systems are compact and flexible enough to be located anywhere in your laboratory, saving valuable space. The 8871 system even uses a single phase, air cooled power pack so that no additional services are required.
|
|
Block loading software for use with FastTrack 8800 servohydraulic testing systems.
|
|
Die Serie 8870 bietet flexible und kompakte servohydraulische Prüflösungen. Die Prüfsysteme der Serie 8870 wurden dazu entwickelt, dem hohen Ansprüchen einer breiten Palette an sowohl statischen als auch dynamischen Prüfanforderungen gerecht zu werden.
|
|
This is a Model 3300-based package for Tire testing, primarily intended for the Chinese market.
|
|
da/dN software for use with FastTrack 8800 servohydraulic testing systems
|
|
LabView Drivers for use with FastTrack 8800 servohydraulic testing systems
|
|
Catalog number 2714-002
Rated capacity 50 N (5 kgf, 11 lbf)
Suitable for a wide range of linear densities (denier and tex)
|
|
Unternehmensprofil; Struktur, Historie, Produkte, Forschung und Qualität
|
|
Instron® Weltklasse-Schulung machen einen messbaren Unterschied für den effizienteren, zuverlässigeren und sicheren Betrieb aus.
|
|
Simulates hip joint loading and motion.
|
|
The BioPuls Dual Station ASTM Hip sy stem applies physiologically accurate loads and a range of motions including flexion-extension,
abduction-adduction and inward rotation on a test
specimen, while it is soaked in a serum bath
maintained at +37 °C. The unique Dual-Station philosophy incorporates an upper test specimen and a lower control station.
|
|
Bei den EXTRA Instron Dienstleistungen dreht sich alles um Ihren langfristigen Bedarf - Online-Support, Telefon-Support, Vor-Ort-Support, Software-Support, Kalibrierungsdienste, Schulung und Beratung, Lebenszyklus-Management.
|
|
Catalog describing miscellaneous Dynatup impact accessories.
|
|
Brochure describing Instron's complete Pendulum product line.
|
|
CBS' Hit Drama, CSI Miami, To Feature Instron Testing Machine on January 5, 2004
|
|
White paper discussing fundamental theories of board level drop impact testing and a study of the fracture characteristics of solder interconnections under high-speed impact using Instron's new Micro Impact tester.
|
|
MicroImpact tester for the electronics industry.
|
|
|
|
|
|
|
|
|
|
|
|
Testing solutions for wire, rope and cable. WB1160B
|
|
FastTrack2, K1C, Fracture toughness software - WB1102B
|
|
FastTrack2 - J1C Unloading compliance software.- WB1102B
|
|
5800 Series incorporates is a high performance materials testing system controller combining
ultra-high data and control loop update rates with flexible and accessible test functionality... - WB1143B
|
|
Servohydraulische Prüfsysteme der
Serie 8801 von Instron® sind konzipiert für
anspruchsvolle Anwendungen in der statischen
und dynamischen Werkstoffprüfung. Die
Maschinen der Serie 8801 sind eine
umfassende Lösung für die moderne
Werkstoff- und Bauteilprüftechnik und bestens
geeignet für Ermüdungs- und
Bruchmechanikversuche. Mit ihrem
kompakten Prüfrahmen können sie
problemlos im Labor aufgestellt werden -
verstärkte Fußböden oder erhöhte Decken sind
normalerweise nicht erforderlich.
WB1103C-G
|
|
J1c Software for use with FastTrack 8800 servohydraulic testing systems
wb 1107b
|
|
MAX software for FastTrack 8800 servohydraulic testing systems
|
|
Fatigue - FastTrack 2 - Random Spectral Playback. Instron's 32 bit Random software enables you to generate complex waveforms with recorded and derived data, to simulate in-service loading conditions.- WB1102B
|
|
LCF software for use with FastTrack 8800 servohydraulic testing systems.
WB1102B
|
|
K1c Software for use with FastTrack 8800 servohydraulic testing systems
wb1100b
|
|
Full scale capacity ±5 kN to ±200 kN (500 kgf, 1,124 lbf to 20,000 kgf, 44, 960 lbf)
Catalog number 2525-108/112 2518-100/101/102/103/107/111
|
|
Catalog number 2732-003
|
|
A review of developments in testing technology in the context of fracture test methodologies proposed and underdevelopment for measurement of interfacial properties.
|
|
Rated capacities from ±2.5 N to ± 100 kN (0.25 kgf to 10,000 kgf, 0.5 lbf to 22,500 lbf)
ISO DIS 7500/1, EN10002-2, BS1610 (1992) and JIS B7721, B7733
|
|
Universal materials testing software for static hydraulic, electromechanical and torsion testing systems - WB1154B
|
|
WaveMaker Software for use with FastTrack 8800 Servohydraulic Testing Systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The MicroRockwell series 2001M hardness tester is a hybrid instrument that combines typical microhardness test loads and a high precision depth measurement system to perform high speed, direct reading microhardness tests.
|
|
|
|
|
|
|
|
|
|
|
|
EXTEND the system life and capability of your 1340
testing system by upgrading the control system to meet
today's demanding testing requirements.
|
|
This white paper summarizes topics discussed during a three day conference, held at Instron in November 2003 between software developers and a consultant expert, on the physics of metals testing and recent improvements to the calculation algorithms used in Instron Merlin software. Items of interest include test control, changeover criteria, determination of the end of the discontinuous yielding region, and the effect of speed changes on both data and calculations.
|
|
|
|
Replacement tissues for the human body's natural tissues are being developed at a rapid pace in an increasingly competitive market. - pod_SalineTesting_REV2_0504
|
|
Technical information for 8800 tower controller
|
|
TSOP is an accessory for the 8800 and 5800 series test frames to allow for combined test control and method control on an easy to use touch screen. - pod_2410-901_rev1_0304
|
|
The Instron® Dynatup® line of piezoelectric tups are
ideally suited for use in impact testing of thin films
and other ultra-low load materials. Designed to be
used with Dynatup's ImpulseTM data acquisition systems,
the piezoelectric line compliments the existing line of
semiconductor strain gauge tups.
|
|
Instron®'s Dynatup Mini-Tower impact testing system
is a compact, table top system designed for low energy
impact simulation testing. Designed with a small
footprint, the Mini-Tower can achieve energies of up to
18 J (13.2 ft-lb) and velocities up to 3 m/s (9.8 ft/sec).
The Mini-Tower system performs impact
simulation, penetration, and rebound testing.
The system is available with the Dynatup ImpulseTM
data acquisition system with a wide range of tups and
fixtures. The Mini-Tower is also available without
instrumentation for simple pass/ fail test evaluations.
|
|
|
|
Catalog Number 2525-171/ 172
Full scale capacity ±150 kN (15,000 kgf, 33,750 lbf) ±200 kN (20,000 kgf, 45,000 lbf)
ISO DIS 7500/1, EN10002-2, BS1610 (1992) and JIS B7721, B7733
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wilson Instruments conversion wallchart is a valuable tool when comparing different hardness scales, although values can only be considered approximations.
|
|
A detailed knowledge of the mechanical properties is required in order to ensure good process yields and reliable products.
|
|
Katalognummern W-5180 und W-5190. Max. Belastbarkeit: 300 kN bzw. 600 kN. pod_W-5180&W-5190_REV4_0504
|
|
Technical specifications for 8800 desktop controller.- pod_88desktop_REV1_1103
|
|
Verlängern Sie die Lebensdauer Ihrer Instron 1100
Prüfanlage und steigern Sie deren Leistung durch
Aufrüstung des vorhandenen Steuer- und
Regelsystems mit der modernen EXTENDTM 5500
Elektronik und Software von Instron. Instron hat
bereits Erfahrung mit der Aufrüstung von über
5000 Prüfanlagen. 10, 20 und sogar 50 Jahre alte
elektromechanische Belastungsrahmen haben wir
durch Upgrading mit EXTEND-Paketen zu
produktiveren Anlagen mit geringeren
Ausfallzeiten gemacht.
extend6000g
|
|
Detailed description including specifications of Wilson Instruments twin scale digital hardness tester for regular and superficial scale testing with one tester, Model 524T. POD_524MR/T_series_0804
|
|
Catalog number 2716-010
|
|
Catalog Numbers 2630-050/ 051/ 052
|
|
Verlängern Sie die Lebensdauer Ihrer Instron
1100 Prüfanlage und steigern Sie deren Leistung
durch Aufrüstung des vorhandenen Steuer- und
Regelsystems mit der modernen EXTENDTM 5500
Elektronik und Software von Instron. Instron hat
bereits Erfahrung mit der Aufrüstung von über
5000 Prüfanlagen. 10, 20 und sogar 50 Jahre alte
elektromechanische Belastungsrahmen haben wir
durch Upgrading mit EXTEND-Paketen zu
produktiveren Anlagen mit geringeren
Ausfallzeiten gemacht.
extend1100g
|
|
Instron Corporation manufactures a wide range of products used for materials testing. The major product lines are:
- Servohydraulic tension and compression testers
- Electromechanical tension and compression testers
- Impact testers
- Hardness testers
|
|
Instron ’s Dynatup model EC8250 environmental
conditioning system is compatible with 9210, 9250,
8210, and 8250 Dynatup instrumented impact test
systems. Its simple design, large storage capacity,
ease-of-access, and precise temperature control help
facilitate fast and efficient environmental testing.
|
|
Rated capacity 30 kN (3,000 kgf, 6,700 lbf)
Temperature range: -73 °C to 250 °C (-100 °F to 480 °F)
Catalog number 2716-015
|
|
Catalog No: 2712-003. Pneumatic action grips for rapid, easy loading of specimens from delicate films to polymers and woven fabrics. - pod_2712_003b_1002
|
|
Full scale capacity ±300 kN (30,000 kgf, 67,500 lbf) ±600 kN (60,000 kgf, 135,000 lbf)
Catalog Number 2525-114/ 123
|
|
Rated capacities from ±10 N to ±5 kN (1 kgf to 500 kgf, 1 lbf to 1,125 lbf)
|
|
Catalog number 2525-108/112
Full-scale static rated capacities from ±5 kN to ±200 kN (500 kgf, 1,124 lbf to 20,000 kgf, 44, 960 lbf).
Full-scale dynamic rated capacities from ±2.5 kN to ±100 kN (250 kgf, 562 lbf to 10,000 kgf, 2,248 lbf).
|
|
Designed for rigid plastics per ASTM D 695, reinforced plastics per
ASTM D 3846 and then included high-modulus composites as well.
Conforms to: SACMA SRM 1-88
Catalog Number 2505-021/ 022
|
|
Applicable to ASTM C 297 for sandwich constructions.
Suitable for use from -150 °C to 315 °C (-240 °F to 600 °F)
Catalog Number 2505-013/ 014/ 015
|
|
An ideal system for educating students about the mechanical properties of materials and small assemblies. It is a compact, versatile, configurable test instrument capable of tension, compression, bending, shear, flex, in a vertical mode. - Catalog no. 8840-700 - pod_LabMaster_001a_0109
|
|
Testing and Analysis - TestingForHyperelastic, July, 2000
|
|
Nachfahren von mehraxialen Betriebslasten - IST0064BG
|
|
Als integriertes digitales Prüfsystem ist RS LabSite konzipiert für die Kombination von Prüftechnik und Virtual Prototyping und beinhaltet alle für diesen Prozess erforderlichen Werkzeuge. - IST0060BG
|
|
Software für die Durchführung, Überwachung und Auswertung von Versuchen mit periodischen Signalen - IST0063BG
|
|
The SF868 split furnace is highly versatile and has
a proven track record of outstanding reliability.
The case is constructed from polished stainless steel
with aluminum and hardened insulation end plates.
Heated via a wire wound heating element and
insulated with high grade ceramic fiber insulation.
|
|
Designed for testing at high temperatures while still
using standard grips and fixtures.
|
|
This chamber system consists of an insulated
environmental enclosure (custom designed), an
indirectly coupled heating and cooling plant
(air handler) and a humidity plant, connected by
insulated hoses. The air handler combines all heating
and cooling systems, together with the control system
and connected services.
|
|
Instron's new FastTrack 8860 electromechanical testing systems integrate all the mechanical system components into a standard package design.
|
|
|
|
Moderne Betriebsfestigkeits-Prüfstände ermöglichen es Kfz-Herstellern und Systemlieferanten, Abgasanlagen parallel zu anderen Kfz-Komponenten termingenau zur Serienreife zu entwickeln.
|
|
Biaxial HydropulsTM test rigs for automotive wheels and hubs - POD: IST0032 AE
|
|
Die Digitale Mehrkanal-Elektronik fur die Bauteilprüfung und Betriebslastensimulation.
|
|
SATEC™’s origins trace back to the early 1900’s and encompass a number of famous testing equipment companies including Southwark™, Baldwin™, Wiedemann™, Sonntag™, and Arcweld™.
|
|
Article from: Elastomer Seal Performance, January 2002.
|
|
A dual purpose flyer outlining the structural testing solutions and fatigue testing solutions with Instron machines
|
|
|
|
|
|
|
|
|
|
2820-009 Compression Fixture - Parallel to Grain
Meets BS 373 and ASTM D 143
Designed for 50 mm x 50 mm x 200 mm (2 in x 2 in x 8 in) specimens
|
|
Meets ASTM D 143
2820-007 Tension Grips- Parallel to Grain
30 kN (3000 kgf, 6750 lbf) force capacity
Designed for 25 mm (1 in) x 460 mm (18 in) long specimens
|
|
2820-006 Adhesive Bond in Tension Fixture
Meets ASTM D897
10 kN(1000 kgf, 2250 lbf) force capacity
Designed for 48 mm (1.875 in) diameter shaped specimens
|
|
2820-005 Nail or Screw Withdrawal Fixture
25 kN (2500 kgf, 5625 lbf) force capacity for screw withdrawal
10 kN (1000 kgf, 2250 lbf) force capacity for nail withdrawal
Designed for 50 mm x 50 mm x 150 mm (2 in x 2 in x 6 in) specimen sizes
Meets ASTM D 143, ASTM D 1037 and ASTM D 1761
|
|
The micro bend fixture is designed for 3-point flexure testing of miniature components and specimens, where the specimen is supported on two lower anvils and load is applied by a single upper anvil at the center of the specimen.
|
|
The micro bend fixture is designed for 3-point flexure testing of miniature components and specimens. The fixture has a fixed 1 mm (0.04 in) span.
|
|
Catalog number 2715-010
Tests a variety of wire cables
|
|
Upgrade Systems
Extend 8500 Classic Series Fatigue Hydraulic Frames
|
|
|
|
|
|
|
|
Katalognummer W-6010. Der Verfahrweg wird aus dem
Messbereich von 300 mm abzüglich der Messlänge
berechnet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Technical specifications for Dynatup 9250 Specimen Feeder System. Includes standard and optional features plus machine capabilities.
|
|
Stainless steel tubing (or any other variety of rigid metallic tubing) can be difficult to test in tension for two reasons. Standard methods of gripping will cause the tubing to collapse and lead to pre-mature failure of the specimen. Strain measurement is also usually not possible with traditional clip-on extensometers because the knife-edges lead to high stress concentrations and
consequently failure of the thin specimen wall. The purpose of this testing was to recommend a gripping solution and evaluate the use of the Advanced Video Extensometer (AVE) for accurate, non-contacting strain measurement.
|
|
Catalog number 2717-068
|
|
Catalog Number 2717-056
Rated capacity 250 kN (25,000 kgf, 56,200 lbf)
Temperature range: 0 °C to 150 °C (32 °F to 302 °F)
|
|
Catalog number 2716-203
|
|
Catalog Number 2716-110/ 2716-120
Rated capacity 100 kN (10,000 kgf, 22,500 lbf) and 200 kN (20,000 kgf, 45,000 lbf)
Round specimens up to a 50 mm (2 in) diameter flat specimens up to a 40 mm (1.57 in) thickness.
|
|
Catalog number 2716-017
|
|
Catalog number 2716-016
|
|
Catalog number 2716-015
|
|
Catalog number 2716-003
|
|
Catalog number 2716-002
|
|
Meets requirements of ISO 9513, ASTM E83 and EN10,002 part 4
|
|
Wide operating temperature range, from -80 °C to 200 °C (-112 °F to 392 °F)
Designed to meet the requirements of ISO 9513, BS 3846 and ASTM E 83
|
|
Operational and installation Manual for 2810-400 Flexure fixture
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tom Davies, Product Manager for Servohydraulic Machine Products at the Instron Materials Testing Division, gives a presentation on the trends within dynamic materials testing.
|
|
Microindentation/ Vickers Hardness Tester. The instrument for determining Vickers and Knoop hardness.
|
|
Comprehensive 8-page brochure describing the Rockwell 2000 Closed-Loop hardness tester. The Series 2000 uses a unique closed-loop electronic control system and load cell mounted directly on the indenter to eliminate errors. This ensures that preliminary and total forces are applied with unparalleled accuracy and
repeatability.
|
|
Lösungen für Ihre Prüfaufgaben.
|
|
Die mehraxialen Schwingtische (MAST) der
Instron® Structural Testing Systems GmbH
sind für Versuche an einer Vielzahl
unterschiedlicher Prüflinge konzipiert. Dabei
können Schwingungen mit bis zu sechs
Freiheitsgraden einzeln oder gleichzeitig
|
|
Pneumatic tire cord grips provide a convenient method
for clamping tire cord and braided wire to reduce the
problem associated with testing these materials. A
guide pin allows for easy loading onto a graduated
radius cam. This cam provides a stress reduced
clamping area on the specimen.
|
|
Catalog Number 2714-032
Rated capacity 2 kN (200 kgf, 450 lbf)
Suitable for a wide range of linear densities (denier and tex)
|
|
Catalog number 2713-004
Rated capacity 2 kN (200 kgf, 450 lbf)
Temperature range: -70 °C to 315 °C (-94 °F to 600 °F)
Ideal for testing elastomers, flexible plastics and thin films.
|
|
Catalog number 2713-003
Rated capacity 2 kN (200 kgf, 450 lbf)
Ideal for testing elastomers, flexible plastics and thin films.
Temperature range: -70 °C to 315 °C (-94 °F to 600 °F)
|
|
Catalog number 2713-002
Rated capacity 5 kN (500 kgf, 1,125 lbf)
Ideal for testing elastomers, flexible plastics and thin films.
Temperature range: -70 °C to 315 °C
|
|
Pneumatic action grips allows rapid, easy loading of
specimens from delicate films to polymers and woven
fabrics. This provides a very simple and efficient
method for holding test specimens easily and quickly.
|
|
Catalog number 2712-016
Rated capacity 2 kN (200 kgf, 450 lbf)
|
|
Catalog number 2712-015
Rated capacity 1 kN (100 kgf, 225 lbf)
|
|
Catalog number 2712-014
Rated capacity 250 kN (25 kgf, 50 lbf)
|
|
Catalog number 2712-013
Rated capacity 5 N (0.500 kgf, 1 lbf)
|
|
Catalog number 2712-003
Rated capacity 1 kN (100 kgf, 225 lbf)
Specimens from delicate films to polymers and woven fabrics.
|
|
Catalog number 2712-001
Rated capacity 5 N (0.5 kgf, 1 lbf)
Specimens from delicate films to polymers and woven fabrics.
|
|
Catalog Number 2711-001/ 006
Rated capacity 5 N (0.5 kgf, 1.1 lbf)
For single fiber specimens and very fine wire.
|
|
Catalog Number 2710-004
Rated capacity 500 N (50 kgf, 112 lbf)
wide range of specimen thickness
|
|
Catalog Number 2640-010
|
|
New techniques based on Fracture Mechanics principles for properties in mode I, II and mixed mode fracture offer the ability to determine the fundamental materials and interfacial properties needed to properly model package designs.
|
|
|
|
|
|
|
|
Cyclic tests were run on conveyor belt material in accordance
with ISO 9856.
|
|
Modernisierung von Extend MTS Hydraulischen Prüfrahmen für Ermüdungsprüfungen
|
|
Verlängern Sie die Lebensdauer Ihrer
Schenck-Prüfanlage und steigern Sie deren
Leistung durch Aufrüsten des vorhandenen
Steuer- und Regelsystems, damit sie den hohen
Anforderungen der heutigen Zeit an ein Prüfsystem
gerecht wird. 10, 20 und sogar 50 Jahre alte
Schenck-Belastungsrahmen können so aufgerüstet
werden, dass sie für die anspruchsvollen Prüfungen
von heute geeignet sind. Instron® hat dies bereits
bei Tausenden von Prüfrahmen und Hunderten von
Schenck-Belastungsrahmen erreicht.
|
|
A Gage Repeatability & Reproducibility (GR+R) study to determine how much of the process tolerance is being used up by variation in the testing instrument (equipment variation or repeatability) as well as between operators (appraiser variation or reproducibility).
|
|
Overview of Analog Microhardness Wilson-Wolpert Series 401 and 402 testers for Knoop and Vickers testing. Includes specifications, capabilities, standard accessories and recommended options.
|
|
Der Labtronic® 8400-Controller ist ein digitaler servohydraulischer Controller, der speziell für die Bauteilprüfung konstruiert wurde.
|
|
RS Console ist die moderne Software zur Prüfstandssteuerung.
Sie ist die PC-basierte Bedienebene für die Regelelektronik Labtronic 8800 und findet Anwendung in der Bauteilprüfung und
Betriebslasten-Simulation.
|
|
One page overview of Wilson Instruments floor model Brinell hardness testers. Model AP specially suited for high-volume, production testing; Model K is a heavy-duty hydraulic tester. Direct-reading option available.
POD _Model K-10, AP, KDR-10, AP-DR _0804
|
|
One page overview of Wilson Instruments Brinell benchtop models MJ and J. Model MJ is a motorized Brinell tester; Model J is a manually-operated system.
POD _Model MJ/J _0904
|
|
Comprehensive 40+ page catalog of Accessories for Wilson Instruments hardness testers. Includes anvils, specimen support fixtures, test blocks and indenters for Rockwell, Brinell, Knoop/Vickers, and portable testers.
|
|
Temperature calibration services for environmental chambers, furnaces, process controllers, recorders and readouts.
|
|
RS Console provides the computer-based front panel for the Labtronic® 8800 Controller.
|
|
|
|
The chamber is heated via a mineral insulated
element located next to a two speed fan at the
rear of the chamber. The convected air is
channelled using a baffle plate to the top and
bottom of the chamber and returned through
the center of the baffle plate.
|
|
The chamber is heated via a mineral insulated
element located next to a two speed fan at the
rear of the chamber. The convected air is
channelled using a baffle plate to the top and
bottom of the chamber and returned through
the center of the baffle plate.
|
|
This unique chamber is designed to enclose a variety
of bend fixtures with a split line and removable door
in the plane of the testing machine columns.
|
|
The chamber is heated via a mineral insulated element
located next to a fan at the rear of the chamber. The
forced air is channeled using a baffle plate to the top
and bottom of the chamber and returned through the
center of the baffle plate.
|
|
This robust furnace is designed for use with a range
of test frames and is ideal for numerous high
temperature applications.
|
|
Designed for testing at high temperatures while still
using standard grips and fixtures.
|
|
These specially developed tube furnaces feature
resistance wire elements capable of achieving
temperatures up to +1000 °C (+1832 °F). The
furnace comprises of a resistance wire wound
worktube, low mass insulation surrounded by a
high quality stainless steel case which prevents the
insulation cracking in service.
|
|
These specially developed three zone tubular creep
furnaces feature resistance wire elements capable of
achieving actual specimen temperatures of +1200 °C
(+1832 °F). The furnace comprizes of a resistance
wire wound worktube, low mass insulation surrounded
by a polished stainless steel case.
|
|
The chamber is heated via a mineral insulated
element located next to a two speed fan at the
rear of the chamber. The convected air is
channelled using a baffle plate to the top and
bottom of the chamber and returned through
the center of the baffle plate.
|
|
|
|
|
|
|
|
|
|
|
|
The drip tray provides a means of keeping the test
area clean when evaluating the texture of wet, juicy
semi-solid or easily fractured foods. The stainless steel
and ABS plastic parts are easy-to-clean and provide
excellent corrosion resistance. Three drip tray designs
are available. One for the model 1000/ 1011, one for
the model 4411 and one that fits all remaining models.
Some texture fixtures mount directly into the drip tray.
Others use the catalog number 2830-014 support
frame or an adapter plate. Tapped holes and a
precision locator ring in the base plate provides
flexibility for mounting special fixtures.
All drip tray versions include a food fixture
load cell adapter. Drip tray - Catalog Number 2830-033
|
|
Moderne Betriebsfestigkeits-Prüfstände
ermöglichen es Kfz-Herstellern
und Systemlieferanten, Abgasanlagen
parallel zu anderen Kfz-Komponenten
termingenau zur Serienreife zu entwickeln.
Sie simulieren die Betriebsbelastung
im Zeitraffer absolut realitätsnah
und decken innerhalb weniger
Tage Schwachstellen auf, die sich im
realen Fahrbetrieb vielleicht erst nach
200.000 km Laufleistung zeigen. Mit
weiterentwickelter Hard- und Software
hat IST als erfahrener Hersteller
solcher Prüfstände die Praxisnähe
dieser Tests jetzt noch weiter
gesteigert.
|
|
General Biomedical flyer showing biomedical application solutions for hip, knee, and bi-axial testing systems
|
|
Rated capacities from ±5 N to ± 50 kN (0.5 kgf to 5,000 kgf, 1 lbf to 11,250 lbf)
ISO DIS 7500/1, EN10002-2, BS1610 (1992) and JIS B7721, B7733
pod_2530-400_rev3_0704
|
|
Model number 3119-402 (short version)
Model number 3119-403 (tall version)
|
|
Die Kammer wird mit Hilfe eines Heizelements beheizt, das um den Ventilator herum
angeordnet ist. Das Heizelement ist durch einen Mineralmantel isoliert. Die Luft in der
Kammer wird über ein Luftleitblech im hinteren Teil der Kammer nach oben und nach unten geführt und anschließend durch die Mitte des Luftleitbleches nach hinten gesaugt und wieder dem Kreislauf zugeführt.
|
|
Die Plattform zum Starten Ihrer Applikationen und Verwalten Ihrer Versuchsergebnisse - IST0061BG
|
|
Graphische Anzeige und Signalbearbeitung. - IST0065BG
|
|
FastTrack 8800 systems, combined with Instron frames, load cells, actuators and hydraulic power packs, provide machine control and data acquisition for a wide range of dynamic and static tests. Technical specifications on the common elements used for testing, and expected performance.- pod_8800 techspec_REV1_1103
|
|
FastTrack 8800 systems, combined with Instron frames, load cells, actuators and hydraulic power packs, provide machine control and data acquisition for a wide range of dynamic and static tests.
|
|
Encompassing a broad range of static and dynamic high capacity test applications from basic metals through rock mechanics to large scale structural testing.- pod_highcap_REV1_1103
|
|
The TMF system simulates the combined effects of mechanical fatigue and thermal cycling experienced by gas turbine and similar equipment. - pod_tmf_REV1_1103
|
|
NATA certifies Instron Singapore Pte Ltd Calibration Laboratory complies with ISO 17025
|